Layer 1

Is Victorville Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, July 30, 2022
+

Table of Contents

Can You Drink Tap Water in Victorville?

Yes, Victorville's tap water is generally considered safe to drink as Victorville has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page or the city's water provider website.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Victorville's water utility, Victorville Water District, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. The last violation for Victorville was resolved on March 31, 2014. This assessment is based on the Victorville Water District water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Victorville Tap Water

The most recent publicly available numbers for measured contaminant levels in Victorville tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Victorville's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Victorville Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named Victorville Water District for Victorville in California. For more details please see the "What do these Violations Mean?" section below.

From Jan. 1, 2014 to March 31, 2014, Victorville had 2 non-health based Safe Drinking Water Act violations with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Routine (IDSE) which falls into the Disinfectants and Disinfection Byproducts Rule rule code group, and the Stage 2 Disinfectants and Disinfection Byproducts Rule rule code family for the following contaminant codes: Total Haloacetic Acids (HAA5), TTHM.

Is there Lead in Victorville Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Victorville water system, Victorville Water District, between sample start date and sample end date, were at or below, 0.0 mg/L of lead in Victorville water. This is 0% of the 0.015 mg/L action level. This means 10% of the samples taken from Victorville contained more lead.

While Victorville water testing may have found 0.0 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Victorville Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - George Air Force Base - near Victorville with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Victorville has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Victorville SDWA Violation History Table - Prior 10 Years

Compliance Period Status Health-Based? Category Code Code Rule Code Contaminant Code Rule Group Code Rule Family Code
01/01/2014 - 03/31/2014 Resolved No Monitoring and Reporting (MR) Monitoring, Routine (IDSE) (30) Stage 2 Disinfectants and Disinfection Byproducts Rule (220) Total Haloacetic Acids (HAA5) (2456) Disinfectants and Disinfection Byproducts Rule (200) Stage 2 Disinfectants and Disinfection Byproducts Rule (220)
01/01/2014 - 03/31/2014 Resolved No Monitoring and Reporting (MR) Monitoring, Routine (IDSE) (30) Stage 2 Disinfectants and Disinfection Byproducts Rule (220) TTHM (2950) Disinfectants and Disinfection Byproducts Rule (200) Stage 2 Disinfectants and Disinfection Byproducts Rule (220)

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Victorville Water - Frequently Asked Questions

HOW TO GET INVOLVED
Board of Director meetings are always open to the public. They are held at the Victorville City Hall Council Chambers, located at 14343 Civic Drive in Victorville, California on the first and third Tuesdays of each month at 6:00 p.m.
HOW DO I CONTACT VICTORVILLE CUSTOMER SERVICE?
To contact customer service for the Victorville water provider, Victorville Water District, please use the information below.
By Phone: 760-955-2993
By Email: avillarreal@victorvilleca.gov
By Mail: P.O. BOX 5001
VICTORVILLE, CA, 92393
HOW TO PAY BILL FOR VICTORVILLE WATER DISTRICT
Already have an account?

Existing customers can login to their Victorville Water District account to pay their Victorville water bill by clicking here.

Want to create a new account?

If you want to pay your Victorville Water District bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Victorville water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Victorville water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP VICTORVILLE WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Victorville means you will often need to put the water in your name with Victorville Water District. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Victorville means you will likely need to take your name off of the water bill with Victorville Water District. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

The estimated price of bottled water

$2.33 in USD (1.5-liter)

USER SUBMITTED RATINGS

Victorville tap water
  • Drinking Water Pollution and Inaccessibility 25% Low
  • Water Pollution 50% Moderate
  • Drinking Water Quality and Accessibility 75% High
  • Water Quality 50% Moderate

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Victorville, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Victorville Water Quality Report (Consumer Confidence Report)

The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Victorville's Water. If you would like to see the original version of the report, please click here.

CIT Y OF VIC TORVILLE WATER DISTRIC T

2020 Consumer Confidence Report

Issued May 2021

GOOD TASTING HIGH QUALITY WATER SUPPLY

We are proud to provide our customers with reliable , affordable, and exceptional quality drinking water that is known for its good taste. Our water comes from a local underground basin called the Alto Subarea of the Upper Mojave River Basin. It pro- vides more than seven billion gallons of water each year to the residents we serve.

We purchase additional water from the Mojave Water Agency that also comes from wells in the Alto Subarea that are replenished with imported water. Our water is delivered through a system of 34 wells and a large system of pipe-lines, pumps, reservoirs, treatment plants, and other facilities.

See the inside pages to learn more about the high-quality water we deliver to you.

BOARD OF DIRECTORS

Debra Jones, Chair

Leslie Irving, Vice Chair

Elizabeth Becerra, Member

Blanca Gómez, Member

In order to ensure that tap water is safe to drink, the U.S. Environmental Protection Agency (U.S. EPA) and the State Water Resources Control Board (State Water Board) prescribe regulations that limit the amount of certain contaminants in water provided by public water systems. State Water Board regulations also estab- lish limits for contaminants in bottled water that provide the same protection for public health.

MORE INFORMATION ABOUT DRINKING WATER

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the U.S. EPA’s Safe Drinking Water Hotline (1-800-426-4791).

ADVICE FOR IMMUNO-COMPROMISED INDIVIDUALS

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised individuals such as a person with cancer undergoing chemotherapy, people who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. U.S. EPA/Centers for Disease Control (CDC) guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (1-800-426-4791).

INFORMATION ABOUT WATER QUALITY

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material. Additionally, water can also pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

  • Microbial contaminants, such as viruses and bacteria, that may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
  • Inorganic contaminants, such as salts and metals, that can be naturally occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
  • Pesticides and herbicides, that may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.
  • Organic chemical contaminants, including synthetic and volatile organic chemicals, that are byproducts of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, agricultural application, and septic systems.
  • Radioactive contaminants, that can be naturally occurring or be the result of oil and gas production and mining activities.

DRINKING WATER SOURCE ASSESSMENT

AND PROTECTION PROGRAM

A source water assessment was conducted for all wells of the Victorville Water District that supply drinking water to customers. The assessment, in compliance with California water quality regulations, assist the District in identifying potential sources of contamination, and to develop methods to protect the water supply. All new wells are subjected to an assessment before being placed into service.

According to the assessment, the underground aquifer that is the source of supply for the District’s wells, is potentially vulnerable to contamination from a variety of sources, including: commercial, industrial, and residential sewer collection systems; high and low density septic systems; mall parking lots; high density housing; other water supply wells; storm drain discharge points; fleet, truck, and bus terminals; injection wells, dry wells, and sumps; RV and mini storage; transportation corridors, including freeways, state highways, roads, and streets, contractor and government agency equipment storage yards; gas stations; hardware, lumber, and parts stores; other water supply wells; automobile repair shops; monitoring, test, injection, and dry wells, sumps; and motor pools.

The District regularly monitors the water quality in all groundwater wells supplying water to District customers, and contaminants from the sources listed above have not been detected.

A copy of the complete assessment(s) is/are available for public inspection at the Public Works/Water counter located on the first floor of Victorville City Hall, by contacting Arnold Villarreal, Acting Water Manager at (760) 245-6424, or at the State Water Resources Control Board Division of Drinking Water, SWRCB-DDW, San Bernardino District Office located at 464 West Fourth Street, Suite 437,

San Bernardino, CA. 92401.

VICTORVILLE WATER DISTRICT: RESULTS OF 2020 DRINKING-WATER-QUALITY TESTS

The District tests for hundreds of substances. The tables on these pages list substances detected in your drinking water in 2020.

As the charts show, very few substances could even be detected.

Inorganic Contaminants

 

VVWD Average

VVWD Range

MCL

 

PHG (MCLG)

Violation

 

Major Sources in Drinking Water

 

 

 

 

 

 

 

 

 

Arsenic* (ppb)

8.1

0-20

10

 

0.004

NO

 

Erosion of natural deposits; runoff from orchards; glass and

 

 

electronics production wastes

 

 

 

 

 

 

 

 

Total Chromium (ppb)

0.1

0-11

50

 

100

NO

 

Discharge from steel and pulp mills and chrome plating;

 

 

erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Discharge from electroplating factories, leather tanneries,

Chromium 6 (ppb)

5.6

0-19

50

 

.02

NO

 

wood preservation, chemical synthesis, refractory production,

 

 

 

 

 

 

 

 

textile manufacturing facilities, erosion of natural deposits

 

 

 

 

 

 

 

 

 

Fluoride (ppm)

0.41

0-1

2.0

 

1

NO

 

Erosion of natural deposits; water additive that promotes

 

 

strong teeth; discharge from fertilizer and aluminum factories

 

 

 

 

 

 

 

 

Nitrate (as No3) (ppm)

0.79

0-3

10

 

10

NO

 

Runoff and leaching from fertilizer use; leaching from septic

 

 

tanks and sewage; erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disinfection Byproducts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VVWD Average

VVWD Range

MCL

 

PHG (MCLG)

Violation

 

Major Sources in Drinking Water

 

 

 

 

 

 

 

 

 

Total Trihalomethanes (TTHMs) (ppb)

5.6

0-32

80

 

n/a

NO

 

By-product of drinking water chlorination

 

 

 

 

 

 

 

 

 

Total Haloacetic Acid (HAA5) (ppb)

0.09

0-4

60

 

n/a

NO

 

By-product of drinking water chlorination

 

 

 

 

 

 

 

 

 

 

Disinfectants

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VVWD Average

VVWD Range

MRDL

 

MRDLG

Violation

 

Major Sources in Drinking Water

 

 

 

 

 

 

 

 

 

Chlorine (ppm)

0.76

.20-1.20

4

 

4

NO

 

Drinking water disinfectant added for treatment

 

 

 

 

 

 

 

 

 

 

Lead and Copper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

# of Samples

90th Percentile Level Detected

 

Sites over AL

AL

 

PHG

Major Sources in Drinking water

 

 

 

 

 

 

 

 

 

 

Lead (total) (ppb)

34

none

N/D

 

N/D

1.3

 

0.03

Customer Household Plumbing

 

 

 

 

 

 

 

 

 

 

Copper (total) (ppb)

34

none

N/D

 

N/D

0.015

 

0.0002

Customer Household Plumbing

 

 

 

 

 

 

 

 

 

 

Regulated Contaminants with Secondary MCLs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VVWD Average

VVWD Range

Secondary MCL

 

Violation

Typical Source of Contaminant

 

 

 

 

 

 

 

 

Chloride (ppm)

8.2

1-52

500

 

NO

Runoff/leaching from natural deposits; seawater influence

 

 

 

 

 

 

 

Specific Conductance (Micromhos)

258.8

170-610

1600

 

NO

Substances that form ions when in water; seawater influence

 

 

 

 

 

 

 

Sulfate (ppm)

20.9

2-130

500

 

NO

Runoff/leaching from natural deposits; industrial wastes

 

 

 

 

 

 

 

Total Dissolved Solids (ppm)

160

110-360

1000

 

NO

Runoff/leaching from natural deposits

 

 

 

 

 

 

 

 

 

Turbidity (NTU)

0.18

0-2

5

 

NO

Soil runoff

 

 

 

 

 

 

 

 

 

 

 

 

Unregulated Parameters That May be of Interest to Consumers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VVWD Average

VVWD Range

MCL

 

PHG (MCLG)

Notification Level

 

 

 

 

 

 

 

 

 

 

 

 

Alkalinity (ppm)

91.9

57-160

N/S

 

N/S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Calcium (ppm)

10.3

0-66

N/S

 

N/S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hardness (ppm)

30.3

0-210

N/S

 

N/S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Magnesium (ppm)

1.11

0-11

N/S

 

N/S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Potassium (ppm)

0.8

0-3

N/S

 

N/S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sodium (ppm)

41.6

0-63

N/S

 

N/S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Microbiological Contaminants

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Highest No.

No. of Months

 

 

MCL

 

 

MCLG

Typical Source of Bacteria

 

of Detections

in Violation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total Coliform Bacteria

0

0

More than 5% of Monthly Samples are Positive

 

0

Naturally present in the Environment

 

 

 

 

 

 

 

Fecal Coliform or E. Coli

0

0

A routine Sample and a repeat sample detect total

 

0

Human and Animal fecal waste

 

 

 

coliform and either sample also detects fecal

 

 

 

 

 

 

coliform or E. Coli.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While your drinking water meets the federal and state standard for arsenic, it does contain low levels of arsenic. The arsenic standard balances the current understanding of arsenic’s possible health effects against the costs of removing arsenic from drinking water. The U.S. Environmental Protection Agency continues to research the health effects of low levels of arsenic, which is a mineral known to cause cancer in humans at high concentrations and is linked to other health effects such as skin damage and circulatory problems.

2020 – IMPORTED WATER FROM MOJAVE WATER AGENCY

This report includes results from several tests for various constituents. Mojave Water Agency routinely monitors for constituents in the Agency’s drinking water in accordance with Federal and State laws. Substances that are not detected (ND) are not listed. Values accompanied by < indicate a result less than the detection limit. The results below represent drinking water quality tests performed by Mojave Water Agency on the R3 wholesale water system and represents water produced from wells 1, 2, 3, 4, & 5. These wells provide high quality drinking water through service connections to the cities of Victorville and Hesperia upon request.

Contact your local water provider for detailed information on your water quality and where your water comes from.

Inorganic w/ Primary Drinking Water Standards

 

 

 

 

 

Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

 

Contaminants

Average

Sample Range

MCL

PHG

Sample Date

Violation

Major Sources in Drinking Water

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Erosion of natural deposits; water additive

Fluoride (mg/L) (Naturally Occurring)

0.28

0.25-0.32

2

1

2019

NO

that promotes strong teeth; discharge from

 

 

 

 

 

 

 

fertilizer and aluminum factories

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Runoff and leaching from fertilizer use;

Nitrate as N (mg/L) (NO3-N)

0.51

0.44-0.60

10

10

2020

NO

leaching from septic tanks and sewage;

 

 

 

 

 

 

 

erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Runoff and leaching from fertilizer use;

Nitrate + Nitrite (mg/L) (as N)

0.51

0.44-0.60

10

10

2020

NO

leaching from septic tanks and sewage;

 

 

 

 

 

 

 

erosion of natural deposits

 

 

 

 

 

 

 

 

Radioactive Contaminants

 

 

 

 

 

 

Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

 

Uranium (pCi/L)

0.72

<10-1.3

20

0.43

2019

NO

Erosion of natural deposits

 

 

 

 

 

 

 

 

Radium 226 + 228 (pCi/L)

<1.0

<1.0-1.8

5

0

2019

NO

Erosion of natural deposits

 

 

 

 

 

 

 

 

Disinfectant Byproducts

 

 

 

 

Sample results are from the distribution system from Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

 

“Haloacetic Acids (ug/L) (HAA5)”

<1.0

<1.0-1.6

60

N/A

2020

NO

Byproduct of drinking water disinfection

 

 

 

 

 

 

 

 

“Total Trihalomethanes (ug/L) (TTHM)”

6.0

<1.0-14.6

80

N/A

2020

NO

Byproduct of drinking water disinfection

 

 

 

 

 

 

 

 

Regulated Contaminants with Secondary Maximum Contaminant Levels

 

 

 

Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

Contaminants

Average

Sample Range

Secondary MCL

Sample Date

Violation

Major Sources in Drinking Water

 

 

 

 

 

 

 

Chloride (mg/L)

22

18-25

500

2019

NO

Runoff/leaching from natural deposits; seawater influence

 

 

 

 

 

 

 

Odor (units)

1

1

3

2019

NO

Naturally occurring organic materials

 

 

 

 

 

 

 

Specific Conductance (PS/cm)

240

220 - 250

1600

2019

NO

Substances that form ions when in water; seawater influence

 

 

 

 

 

 

 

Sulfate (mg/L)

15

13-17

500

2019

NO

Runoff/leaching from natural deposits; industrial wastes

 

 

 

 

 

 

 

Total Dissolved Solids (mg/L)

146

130-170

1000

2019

NO

Runoff/leaching from natural deposits

 

 

 

 

 

 

 

 

Turbidity (NTU)

<0.10

<0.10-0.60

5

2019

NO

Soil runoff

 

 

 

 

 

 

 

 

Disinfection Residual

 

 

 

 

Sample results are from the distribution system from Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

Constituent

Average

Sample Range

MCL

PHG(MCLG)

Sample Date

Major Sources in Drinking Water

 

 

 

 

 

 

 

Chlorine (mg/L)

0.53

0.20-1.11

4

4

Weekly

Drinking water disinfectant added for treatment

 

 

 

 

 

 

 

 

Unregulated Contaminants

 

 

 

 

 

 

Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

 

Contaminants

Average

Sample Range

MCL

PHG(MCLG)

NL

Sample Date

Major Sources in Drinking Water

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vanadium is a naturally occurring

Vanadium (ug/L)

<3.0

<3.0-32

None

None

50

2019

”rare earth” element that is found in the

 

 

 

 

 

 

 

earth’s crust

 

 

 

 

 

 

 

 

Constituents that may be of interest to consumers

 

 

 

 

 

Wells 1,2,3,4, & 5

 

 

 

 

 

 

 

 

Contaminants

Average

Range

Sample Date

Note

 

 

 

 

 

 

 

 

 

 

Bicarbonate (mg/L)

86

81-89

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Calcium (mg/L)

27

24-30

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Magnesium (mg/L)

4.2

3.5-4.9

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

pH

7.5

7.4-7.7

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Potassium (mg/L)

1.5

1.3-1.6

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Sodium (mg/L)

15

14-16

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Total Alkalinity (as CaCO3) (mg/L)

70

67-73

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Total Hardness (as CaCO3) (mg/L)

86

73-96

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

Aggressive Index

11.21

11.09-11.34

2019

No PHG or MCL’s available

 

 

 

 

 

 

 

 

 

 

ABBREVIATIONS AND DEFINITIONS TO HELP YOU UNDERSTAND THIS REPORT

These abbreviations and definitions of water-quality goals and standards will help you better understand the water-quality information in this report.

The information shows how your water compares to requirements established by state and federal regulators to safeguard public health.

Maximum Contaminant Level (MCL): The highest level of a contaminant that is allowed in drinking water. Primary MCLs are set as close to the PHGs (or MCLGs) as is economically and technologically feasible. Secondary MCLs are set to protect the odor, taste, and appearance of drinking water.

Maximum Contaminant Level Goal (MCLG): The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are set by the U.S. Environ- mental Protection Agency.

mg/L: For the definition, see PPM to the right.

Maximum Residual Disinfectant Level (MRDL):

The level of a disinfectant added for water treatment that may not be exceeded at the consumer’s taps.

Maximum Residual Disinfectant Level Goal (MRDLG): The level of a disinfectant added for water treatment below which there is no known or expected risk to health. MRDLGs are set by the U.S. Environmental Protection Agency.

Micromhos per cm (uS/cm): A measure of conductivity.

N/A: Not applicable.

Notification Level (NL):The concentration of a contaminant which, if exceeded, triggers notification to local political jurisdic- tions and customers.

N/S: No Standard.

ND: Not Detected.

Notification Level (NL):The concentration of a contaminant which, if exceeded, triggers notification to local political jurisdic- tions and customers.

NTU: Nephelometric turbidity unit.

pCi/L: Pico curies per liter, a measure of radiation.

Primary Drinking Water Standard (PDWS): MCL’s and MRDL’s for contaminants that affect health along with their monitoring and reporting requirements and water treatment requirements.

Public Health Goal (PHG): The level of a contaminant in drinking water below which there is no known or expected risk to health. PHGs are set by the California Environmental Protection Agency.

PPB or ug/L: Parts per billion, or micrograms per liter. 1 PPB is equal to about one drop in 17,000 gallons of water.

PPM (parts per million), or mg/L (milligrams per liter):

1 PPM or 1 mg/L is equal to about one drop in 17 gallons of water.

Regulatory Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements that a water system must follow.

Secondary Drinking Water Standard: Requirements that ensure appearance, taste, and smell of drinking water are acceptable.

Secondary MCL’s (SMCL): Are set to protect the odor, taste, and appearance of drinking water.

Unregulated Contaminants: Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in drinking water and whether future regulation is warranted. For additional information, call the Safe Drinking Water Hotline at (800) 426-4791.

<: Less than the detection limit.

Radon is an unregulated chemical, therefore, there are no State drinking water standards for radon in California. Radon was detected at Wells 2-5 during the initial sampling in 2010 with results ranging from 479- 589 pCi/L and an average of 546 pCi/L. All wells were below the U.S. EPA MCL advisory level of 4,000 pCi/L. Radon is a radioactive gas that you cannot see, taste, or smell, and is found throughout the U.S. Radon can move up through the ground and into a home through cracks and holes in the foundation. Radon can build up to high levels in a home. Radon can also get into indoor air when released from tap water from showering, washing dishes, and other household activities. Compared to radon entering the home through soil, radon entering the home through tap water will in most cases be a small source of radon in indoor air. Radon is a known human carcinogen. Breathing air containing radon can lead to lung cancer. Drinking water containing radon may also cause increased risk of stomach cancer. If you are concerned about radon levels in your home, you can test the air. Testing is inexpensive and easy. You should pursue radon removal for your home if the level of radon in your air is 4 picocuries per liter of air (pCi/L) or higher. There are simple ways to fix a radon problem that are not too costly.

For additional information, contact the radon program via email at radonprogram@cdph.ca.gov or by calling 1-800-745-7236. You can also contact the U.S. EPA Safe Drinking Water Act Hotline at 1-800-426-4791 or the National Safety Council Radon Hotline, 1-800-557-2366.

CITY OF VICTORVILLE WATER DISTRICT

14343 Civic Drive, Victorville, CA 92392-5887760-955-5000 General Information • www.VictorvilleCA.gov

How to Get Involved

Board of Director meetings are always open to the public. They are held at the Victorville City Hall Council Chambers, located at 14343 Civic Drive in Victorville, California on the first and third Tuesdays of each month at 6:00 p.m.

Please Call With Your Questions

For more information about your water quality, call Arnold Villarreal at 760-245-6424 between 8:00 a.m. and 5:00 p.m. Monday through Thursday or Friday between 8:00 a.m. and 4:00 p.m.

En Español

Este informe contiene información muy importante sobre la calidad de su agua potable. Si usted no com- prende esta información, por favor pida a alguien que se la traduzca o llámenos al 760-245-6424.

Contaminants


Victorville Water District

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the California State Water Resources Control Board, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 111649
  • Data available: 2012-2017
  • Data Source: Groundwater
  • Total: 23

Contaminants That Exceed Guidelines

  • Arsenic
  • Bromodichloromethane
  • Bromoform
  • Chromium (hexavalent)
  • Dibromochloromethane
  • Nitrate
  • Nitrate and nitrite
  • Total trihalomethanes (TTHMs)
  • Vanadium

Other Detected Contaminants

  • Aluminum
  • Barium
  • Chlorate
  • Chloroform
  • Chromium (total)
  • Dibromoacetic acid
  • Dichloroacetic acid
  • Fluoride
  • Haloacetic acids (HAA5)
  • Manganese
  • Molybdenum
  • Monochloroacetic acid
  • Perchlorate
  • Strontium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

'

When we talk about tap water, we are mostly talking about water that comes from a home''s main water supply. Some of the other supplies that can be used for this purpose include well water, springs, and even a municipal water treatment plant. The water that comes from a home''s main water supply is safe to drink, however, you need to know some of the ways that you can improve it.

First, you will want to take a good look at your pipes. You may not have a shower head, but you do want to make sure that your shower head is not clogged with any build-up. Most of the time, you can clean up a clog by using warm soapy water. However, if this does not work, you will need to call a plumber.

Another area that you may want to check is the drain field. If you notice any build-up in this area, you will want to have the drain field drained immediately. In the event that you do drain a drain field, you will want to be sure to drain the main water line before this hap

Layer 1
Layer 1
Layer 1
Layer 1