Layer 1

Is Fort Worth Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, August 6, 2022
+

Table of Contents

Can You Drink Tap Water in Fort Worth?

Yes, Fort Worth's tap water is generally considered safe to drink as Fort Worth has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page, the city's water provider website, or Fort Worth's local Twitter account.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Fort Worth's water utility, City of Fort Worth, had 1 health-based violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. The last violation for Fort Worth was resolved on March 31, 2021. This assessment is based on the City of Fort Worth water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Fort Worth Tap Water

The most recent publicly available numbers for measured contaminant levels in Fort Worth tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Fort Worth's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Fort Worth Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named City of Fort Worth for Fort Worth in Texas. For more details please see the "What do these Violations Mean?" section below.

From March 1, 2021 to March 31, 2021, Fort Worth had 1 health-based Safe Drinking Water Act violation with the violation category being Treatment Technique Violation, more specifically, the violation code was Treatment Technique (SWTR and GWR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Long Term 2 Enhanced Surface Water Treatment Rule.

For the compliance period beginning Nov. 10, 2014, Fort Worth had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Public Notification Violation for NPDWR Violation which falls into the Other rule code group, and the Public Notice Rule rule code family for the following contaminant code: Public Notice.

From July 1, 2014 to July 31, 2014, Fort Worth had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Repeat Minor (TCR) which falls into the Microbials rule code group, and the Total Coliform Rules rule code family for the following contaminant code: Coliform (TCR).

Is there Lead in Fort Worth Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Fort Worth water system, City of Fort Worth, between sample start date and sample end date, were at or below, 0.0075 mg/L of lead in Fort Worth water. This is 50.0% of the 0.015 mg/L action level. This means 10% of the samples taken from Fort Worth contained more lead.

While Fort Worth water testing may have found 0.0075 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Fort Worth Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - Carswell AFB - near Fort Worth with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Fort Worth has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Fort Worth SDWA Violation History Table - Prior 10 Years

Compliance Period Status Health-Based? Category Code Code Rule Code Contaminant Code Rule Group Code Rule Family Code
03/01/2021 - 03/31/2021 Resolved Yes Treatment Technique Violation (TT) Treatment Technique (SWTR and GWR) (41) Long Term 2 Enhanced Surface Water Treatment Rule (123) Long Term 2 Enhanced Surface Water Treatment Rule (0800) Microbials (100) Surface Water Treatment Rules (120)
11/10/2014 - Resolved No Other Violation (Other) Public Notification Violation for NPDWR Violation (75) Public Notice Rule (410) Public Notice (7500) Other (400) Public Notice Rule (410)
07/01/2014 - 07/31/2014 Resolved No Monitoring and Reporting (MR) Monitoring, Repeat Minor (TCR) (26) Total Coliform Rule (110) Coliform (TCR) (3100) Microbials (100) Total Coliform Rules (110)

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Fort Worth Water - Frequently Asked Questions

IS BACKFLOW?
Water flows from a faucet, showerhead, or sprinkler system because of pressure. Backflow happens when water flows the wrong direction through the pipes, usually from a loss of pressure on the supply-line side or by pressure increases on the customer side. Causes include water line breaks, repairs or shut-offs. Also of concern are cross-connections, points of physical connection between drinking water and an actual or po- tential contamination hazard. Common cross-connections include: An essential part of providing clean, safe drinking wa- ter to Fort Worth Water customers is ensuring one- way flow of disinfected, treated drinking water from the city’s water distribution system to the home. Bac-
WHAT IS THIS REPORT?
Fort Worth Water annually presents data to its residents on the quality of its drinking water with a Consumer Confidence Report. The Texas Commission on Environmental Quality requires this report. The report shows how Fort Worth continues to deliver high-quality drinking water. The report also addresses where Fort Worth gets its raw water and information on water quality. If you have questions regarding this report, please contact us at 817-392-4477 or wpe@ fortworthtexas.gov and we will get those answers for you. Fort Worth Water has employees who volunteer to talk at Career Day presentations as well as work events for the department, city and community. The H2O Heroes talk about a typical work day, education training requirements and what students need to focus on in studies to have a career with the water department. If you are interested in a school or community group presentation, email: wpe@FortWorthTexas.gov
HOW DO I CONTACT FORT WORTH CUSTOMER SERVICE?
To contact customer service for the Fort Worth water provider, City of Fort Worth, please use the information below.
By Mail: 200 TEXAS ST
FORT WORTH, TX, 76102-6314
HOW TO PAY BILL FOR CITY OF FORT WORTH
Already have an account?

Existing customers can login to their City of Fort Worth account to pay their Fort Worth water bill by clicking here.

Want to create a new account?

If you want to pay your City of Fort Worth bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Fort Worth water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Fort Worth water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP FORT WORTH WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Fort Worth means you will often need to put the water in your name with City of Fort Worth. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Fort Worth means you will likely need to take your name off of the water bill with City of Fort Worth. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

The estimated price of bottled water

$2.03 in USD (1.5-liter)

USER SUBMITTED RATINGS

Fort Worth tap water
  • Drinking Water Pollution and Inaccessibility 40% Moderate
  • Water Pollution 51% Moderate
  • Drinking Water Quality and Accessibility 60% High
  • Water Quality 49% Moderate

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Fort Worth, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Fort Worth Water Quality Report (Consumer Confidence Report)

The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Fort Worth's Water. If you would like to see the original version of the report, please click here.

2020Water Quality Report

HereForYOU!

Compromised immune systems may be more vulnerable

You may be more vulnerable than the general population to certain microbial contaminants, such as Cryptosporidium, in drinking water. Infants, some elderly, or immunocompromised persons such as those undergoing chemotherapy for cancer; those who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders can be particularly at risk from infections. You should seek advice about drinking water from your physician or health care provider. Additional guidelines on appropriate means to lessen the risk of infection by Cryptosporidium are available from the Safe Drinking Water Hotline at (800) 426-4791.

On the cover: Water samples being taken at our Rolling Hills Water Treatment plant.

Message From the Director

Providing safe, reliable and affordable drinking water to our customers is our top priority.

This report provides details about our drinking wa- ter’s quality in 2020. Sometimes the requirements for this report make the information hard to un- derstand. Please contact us at either 817-392-4477 or wpe@fortworthtexas.gov if you have questions.

The most important thing you need to know is that the quality of our drinking water is very good.

It takes a team of dedicated employees to make that possible. The team includes treatment operators, mechanics, maintenance workers, chemists, micro- biologists, engineers, accountants, customer service representatives, office staff and many others.

The pandemic required adapting how we get our jobs done. Our staff has shown resiliency and per- severance as they worked to keep safe water flow- ing to your homes and businesses.

In addition to the required information, please read the stories about Fort Worth’s efforts to improve the environment and protect our water supply.

With kind regards,

Chris Harder, Director

Fort Worth Water

1 Water Quality Report | 2020

2020 | Water Quality Report 2

Fresh Start for Citizen Scientists

volunteer citizen scientist program that for

Expanding the program slowed during the pandem-

three decades has researched water quality

ic in 2020, but efforts to grow the team are again

Ain Texas waterways is getting a fresh start

underway, Miller said.

 

in Fort Worth.

“Basically, anyone who is interested qualifies,” Miller

Leading the city’s Texas Stream Team is Kayla Miller,

said. “I have probably a dozen people who have reached

a senior environmental specialist in water quality mon-

out to me interested in training. I have one mom who

itoring in Fort Worth’s Code Compliance Department.

wants to monitor with her 10-year-old daughter.”

Miller started Fort Worth’s partner program in the

Housed at the Meadows Center for Water and the

fall of 2019 at the request of Cody Whittenburg, Fort

Environment at Texas State University in San

Worth’s environmental program manager. Miller is

Marcos, the Texas Stream Team has more than

a certified citizen scientist and instructor.

11,000 citizen scientists trained to collect surface

Currently, she has two high school students con-

water and environmental quality data that is used

to protect the 191,000 miles of Texas waterways,

ducting research, one at a spot along the Trinity

according to their website.

 

River and the other at an unnamed tributary that

 

 

 

 

 

feeds into the Trinity on the city’s southwest side.

The

team is

comprised

of community mem-

The Fort Worth Nature Center & Refuge in far

bers,

students,

educators,

academic researchers,

north Fort Worth is also monitoring three sites on

 

 

 

 

its property.

 

 

 

 

environmental professionals, and, public and private sector partners. They monitor water conditions at more than 400 sites annually.

Citizen scientists monitor basics such as dissolved oxygen, pH, and temperature to advanced skills monitoring of nitrate-nitrogen, orthophosphate, tur- bidity and E. coli.

Citizen scientists pick their research location and

collect data once a month, which takes about two hours, Miller said. The volunteers are asked to par- ticipate for a minimum of one year, she said.

“To get data we can use, it needs to be long-term,” she said.

Miller submits the local data to the Texas Stream Team database.

The data can be used in many ways, such as a warn- ing to potential problems in a waterbody, to track water quality trends and to develop watershed pro- tections plans.

3 Water Quality Report | 2020

Photo: Two citizen scientists pulling water sample from Trinity River

2020 | Water Quality Report 4

Removing Litter Impacts Water Quality

Fort Worth’s surface waters are a valuable resource for drinking wa- ter, flood control, economic development, recreation and aesthetics. Minimizing pollution reduces public costs for cleaning waterways and

helps provide affordable clean, safe drinking water for all residents.

Litter is a pervasive surface water-quality issue. The goal of the city’s litter program is to change behaviors to reduce the prevalence of litter in the water- ways. The Code Compliance Environmental Quality Division and Keep Fort Worth Beautiful plan and coordinate strategic comprehensive litter control initiatives across the city.

One of the most exciting new initiatives in 2021 is the fundraising effort to build a solar-powered waterwheel trash interceptor for the Trinity River. A waterwheel can collect and re-

move up to 50,000 pounds of solid waste per day, the equivalent of 2-1/2 garbage trucks.

Contact Enviromental@FortWorthTexas.gov for more information on the city’s litter abatement programs.

Photo & statistics courtesy of

Clearwater Mills LLC

www.clearwatermills.com

5 Water Quality Report | 2020

Initiatives

  • Engaging tens of thousands of volunteers in cleanup events
  • Abating hundreds of illegal dumping sites
  • Installing surveillance cameras at illegal dump sites
  • Placing floatable litter and debris collection devices on local waterways
  • Contributing to regional and statewide litter initiatives to protect watersheds
  • Providing safe alternatives for the disposal of tires, bulk waste, household hazardous waste, electronics, compostable mate- rials, yard waste and recyclable goods
  • Supporting a city street sweeping program to keep litter and contaminants out of storm drains
  • Inventorying trash/recycling bins in public places and se- curing grant funding to strategically place new containers
  • Enforcing city ordinances
  • Studying solutions to existing and new litter issues, in- cluding microplastics
likely that chemical constituents may come into con- tact with the source water. It does not mean that there are any health risks present.
Tarrant Regional Water District, from which Fort Worth purchases its water, received the assessment reports.
For more information on source water assessments and protection efforts at our system, contact Stacy Walters at 817-392-8203.
Further details about the source-water assess- ments are available in the Texas Commission on Environmental Quality’s Drinking Water Watch da- tabase at www.bit.ly/TCEQDWW2020.
in some but not all of the water supply sources. No viruses were detected.
Cryptosporidium and Giardia Lamblia are re- moved through disinfection and/or filtration.

Drinking Water Quality Test Results

Microorganism Testing Shows Low Detections in Raw Water

Compound Measure Year Violation

MCL

Your

Public

 

Health

Common Sources of Substance

water

Goal

 

 

 

Tarrant Regional Water District monitors raw water at all intake sites for Cryptosporidium,

 

 

 

 

TT=1

Turbidity

NTU

2020

No

TT= Lowest monthly % of

 

 

 

 

samples ≤ 0.3 NTU

Compound

Year

Violation

MCL

Total Coliforms

 

 

 

TT = 5% of monthly sam-

(including­ fecal coliform

2020

No

ples are positive

& E. coli)

 

 

 

 

 

 

 

0.3

99.9% N/A

Your Range water

1.7% 0 to 1.7%

Soil runoff (Turbidity is a measure of the cloudiness of water. It is monitored because it is a good indicator of the effectiveness of the filtration system.)

Public

Health Common Sources of Substance

Goal

Coliforms are naturally present in the

0 environment as well as feces; fecal coliforms and E. coli only come from human and animal fecal waste.

Giardia Lamblia and viruses. The source is human and animal fecal waste in the watershed.

The 2020 sampling showed occasional low level de- tections of Cryptosporidium and Giardia lamblia

TCEQ Assesses Raw Water Supplies for Susceptibility

Fort Worth uses surface water from Lake

 

 

 

 

 

 

 

 

Your

 

 

 

Public

 

 

Compound

Measure

Year

 

Violation

 

MCL

Range

 

 

Health

 

Common Sources of Substance

 

 

water

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Goal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beta/photon emitters

pCi/L

2020

 

No

50

 

6.8

0 to 6.8

 

0

Decay of natural and man-made deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Arsenic

ppb

2020

 

No

10

 

1.5

0 to 1.5

 

0

Erosion of natural deposits; runoff from orchards;

 

 

 

runoff from glass and electronics production wastes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Atrazine

ppb

2020

 

No

3

 

0.1

0 to 0.1

 

3

Runoff from herbicide used on row crops

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Barium

ppm

2020

 

No

2

 

0.06

0.05 to 0.06

2

Discharge of drilling wastes; discharge from metal

 

 

refineries; erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chromium

ppb

2020

 

No

100

 

3.3

0 to 3.3

 

100

Erosion of natural deposits; discharge from steel

 

 

 

and pulp mills

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cyanide

ppb

2020

 

No

200

 

159

0 to 159

 

200

Discharge from plastic and fertilizer factories;

 

 

 

discharge from steel and metal factories

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water additive which promotes strong teeth;

Fluoride

ppm

2020

 

No

4

 

0.52

0.15 to 0.52

4

erosion of natural ­deposits; discharge from

 

 

 

 

 

 

 

 

 

 

 

 

 

fertilizer and aluminum factories

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nitrate (as Nitrogen)

ppm

2020

 

No

10

 

0.58

0.19 to 0.58

10

Runoff from fertilizer use; leaching from septic

 

 

tanks, sewage; ­erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nitrite (as Nitrogen)

ppm

2020

 

No

1

 

0.02

0.01 to 0.02

1

Runoff from fertilizer use; leaching from septic

 

 

tanks, sewage; ­erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bromate

ppb

2020

 

No

10

 

4.79

0 to 11.4

 

0

By-product of drinking water disinfection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Haloacetic Acids

ppb

2020

 

No

60

 

10.6

3 to 23

 

 

N/A

By-product of drinking water disinfection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total Trihalomethanes

ppb

2020

 

No

80

 

21.0

1.37 to 56

 

 

N/A

By-product of drinking water disinfection

 

 

 

 

 

 

 

 

 

Your

 

 

 

Public

 

Compound

Measure

Year

Violation

 

MRDL

 

Range

Health

Common Sources of Substance

 

water

 

 

 

 

 

 

 

 

 

 

 

 

 

Goal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chloramines

ppm

2020

No

 

 

4

3.5

 

1 to 11

4

Water additive used to control microbes

 

 

 

 

 

 

 

 

 

 

 

 

 

Public

 

Compound

MCL

Year

Violation

 

 

High

Low

Average

Health

Common Sources of Substance

 

 

 

 

 

 

 

 

 

 

 

 

 

Goal

 

Total Organic Carbon

TT = %

2020

No

 

 

1

1

 

1

N/A

Naturally occurring

removal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It is used to determine disinfection by-product precursors. Fort Worth was in compliance with all monitoring and treatment technique requirements for disinfection by-product precursors. A removal ratio of 1 in Specific Ultra Violet Absorbance calculations is considered passing.

Information About Drinking Water

Contaminants found in drinking water may cause taste, color, or odor problems. These types of problems are not necessarily causes for health concerns. For more information on taste, odor, or color of drinking water, please contact customer service at 817-392-4477.

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPA’s Safe Drinking Water Hotline at 800-426-4791.

7 Water Quality Report | 2020

Worth, Eagle Mountain Lake, Lake Bridge- port, Richland Chambers Reservoir, Cedar

Creek Reservoir, Lake Benbrook and the Clear Fork Trinity River.

Fort Worth owns Lake Worth. The U.S. Army Corps of Engineers is responsible for Benbrook Lake. The other four lakes are owned and operated by Tarrant Regional Water District.

The Texas Commission on Environmental Quality completed an assessment of Fort Worth’s source wa- ters. TCEQ classified the risk to our source waters as high for most contaminants.

High susceptibility means there are activities near the source water or watershed that make it very

Photo: Two

 

 

Pretreatment

 

 

employees take

 

 

sample from a water

 

 

testing site

2020 | Water Quality Report

8

 

Secondary Constituents

These items do not relate to public health but rather to the aesthetic ­effects. These items are often important to industry.

Compound

Measure

Your water

Bicarbonate

ppm

108 to 131

Calcium

ppm

37.9 to 50.8

Chloride

ppm

19.3 to 37.6

Conductivity

µmhos/cm

324 to 440

pH

units

8.2 to 8.4

Magnesium

ppm

4.24 to 8.12

Sodium

ppm

18 to 26.9

Sulfate

ppm

20.6 to 36.5

Total Alkalinity as CaCO3

ppm

108 to 131

Total Dissolved Solids

ppm

181 to 277

Total Hardness as CaCO3

ppm

112 to 160

Total Hardness in Grains

grains/gallon

7 to 9

Potential Raw Water Impurities

  • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
  • Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
  • Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff and residential uses.
  • Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.
  • Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.

Abbreviations Used in Tables

MCL: Maximum Contaminant Level – the highest level of a contaminant that is allowed­ in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

MCLG: Maximum Contaminant Level Goal – the level of a contaminant in drinking­ water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

MRDL: Maximum Residual Disinfectant Level – the highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

MRDLG: Maximum Residual ­Disinfectant Level Goal – the level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

N/A - not applicable/does not apply

NTU – Nephelometric Turbidity Unit; a measure of water turbidity or clarity­ pCi/L – Picocuries per liter; a measure of radioactivity

ppb – Parts per billion or micrograms per liter (µg/L) ppm – Parts per million or milligrams per liter (mg/L)

  1. Treatment Technique – a required process intended to reduce the level of a contaminant in drinking water

Level 1 assessment: A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible) why total coliform bacteria were found. Fort Worth was not required to conduct a Level 1 assessment in 2020.

Level 2 assessment: A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine (if possible) why an Escherichia coli (E. coli) maximum contaminant level (MCL) violation has occurred and/or why total coliform bacteria were found on multiple occasions. Fort Worth was not required to conduct a Level 2 assessment in 2020.

Unregulated Contaminants

Unregulated contaminants are those for which the EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in drinking water and whether future regulation is warranted.

Compound

Bromoform

Bromodichloromethane

Chloroform

Dibromochloromethane

Dibromoacetic Acid

Dichloroacetic Acid

Monobromoacetic Acid

Monochloroacetic Acid

Trichloroacetic Acid

Measure

 

 

Public

 

Range of

MRDL

 

 

Health

Average

 

Detects

 

 

 

Goal

 

 

 

 

 

 

 

 

 

 

 

 

ppb

Not regulated

0

0.85

0 to 3.53

ppb

Not regulated

0

2.93

3.18 to 17.5

ppb

Not regulated

70

3.05

3.10 to 24.7

ppb

Not regulated

60

2.73

1.59 to 11.8

ppb

Not regulated

 

N/A

1.33

1.70 to 3

ppb

Not regulated

0

4.11

4.20 to 11

ppb

Not regulated

 

N/A

0.02

0 to 1

ppb

Not regulated

70

0.49

1 to 5

ppb

Not regulated

20

0.1

0 to 5

Common Sources

of Substance

By-products of drinking water disinfection; not

­regulated individually but regulated as a group called Total ­Trihalomethanes

By-products of drinking water disinfection; not regulated­ individually but regulated as a group called Haloacetic Acids

Photo: Basins & storage tank at Westside Water Treatment Plant

9 Water Quality Report | 2020

Conservation First

 

In 2020 saved

Per capita usage

2.6

billion

152

gallons

 

 

gallons

 

per day

 

 

 

 

 

 

In 2020, Fort Worth saved 2.6 billion gallons of water. A much higher number of gallons, when compared to the 51 million gallons from 2019, and due to the inclusion of reuse water, not included in the past.

On average, during 2020 each Fort Worth resident used 152 gallons of water per day, an increase of 5 gallons a day from the 147 gallons per day recorded in 2019. Experts attribute the increase to people working from home, using more water, and staying virus-free due to the COVID-19 pandemic.

Getting the Lead Out

Why Backflow Matters to Water Quality

 

ive years ago, Fort Worth decided to locate

If present, elevated levels of lead can cause serious

 

and then remove all city-owned lead ser-

health problems, especially for pregnant women

Fvice lines.

 

 

 

 

and young children. Lead in drinking water is

 

As of March 31, the utility has surveyed 86 percent

primarily from materials and components associ-

 

ated with service lines and home plumbing.

 

of the nearly 276,000 water meters citywide and

 

 

 

 

 

98.5 percent of the meters inside Loop 820, where

Fort Worth is responsible for providing high qual-

 

the bulk of the lead lines are found.

 

 

ity drinking water, but cannot control the variety

 

Replacing the lead lines is 78 percent completed.

of materials used in plumbing components. When

 

your water has been sitting for several hours, you

 

The City Council recently approved spending an ad-

 

can minimize the potential for lead exposure by

 

ditional $400,000 on the project, which began about

 

running your faucet for 30 seconds to two min-

 

five years ago. So far, 1,444 of the 1,830 lead service

 

utes before using water for drinking or cooking.

 

lines identified are replaced.

 

 

 

 

 

 

 

If you are concerned about lead in your water, you

 

The service line is the piping that connects the

 

can have it tested. The test is free for Fort Worth

 

home or business to the water main. The city

 

customers with known lead service lines. If you

 

and the property owner share ownership of the

 

do not have a known lead service line, the cost is

 

service line.

 

 

 

 

 

 

 

 

 

 

 

$15 per water sample. Email MyWaterAccount@

 

 

 

 

 

 

 

 

The city owns the portion from the main to the wa-

FortWorthTexas.gov or call 817-392-4477 to

 

ter meter, including the water meter. The property

make arrangements.

 

 

owner is responsible for the portion from the me-

Information on lead in drinking water, testing

 

ter to the point it enters the home or business, as

 

methods and steps you can take to minimize ex-

 

well as all the plumbing in the home or building.

 

posure is available from the Safe Drinking Water

 

 

 

 

 

 

 

 

Eliminating lead service lines may not eliminate

Hotline or at www.epa.gov/safewater/lead.

 

lead in drinking water. The plumbing materials

Visit www.FortWorthTexas.gov/departments/water/

 

used in the home or business could contain lead,

 

lead for tips to reduce your exposure to lead in

 

such as solder, pipes, faucets (brass) and fittings.

 

drinking water and more information about Fort

 

 

 

 

 

 

 

 

Lead dissolves into water over time through cor-

Worth’s program.

 

 

rosion – a dissolving or wearing of metal caused

 

 

 

Corrosion Control

 

by a chemical reaction between water and plumb-

 

ing materials. Fort Worth adjusts the water’s pH

To meet the requirements of the Lead

 

to control this reaction.

 

 

 

 

 

 

 

and Copper Rule, Fort Worth achieves

 

 

 

 

 

 

 

corrosion control through pH adjustment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lead and Copper Testing

 

 

 

 

 

 

 

Action

90th

# of sites exceeding

Public

Common Sources

 

Contaminant

Measure

Year

Violation

Health

 

Level

percentile

action level

of Substance

 

 

 

 

 

Goal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lead

ppb

2020

No

15

7.7

1

0 Corrosion of household plumbing

 

Copper

ppm

2020

No

1.3

0.4

0

1.3

systems; erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

90th Percentile Value:

90 percent of the samples were at or below this value. EPA considers the 90th percentile value the same as an “average” value for other contaminants. Lead and copper are regulated by a treatment technique that requires systems to control the corrosiveness of their water. If more than 10 percent of tap water samples exceed the action level, water systems must take additional steps.

Action Level:

The concentration of a contaminant which, if exceeded, triggers treatment or other requirements that a water system must follow.

Did you ever wonder why they install faucets so far above sinks? The reason is to create an airgap that keeps the water in the sink from flowing back into the faucet, causing backflow. So what

is backflow?

Water flows from a faucet, showerhead, or sprinkler system because of pressure. Backflow happens when water flows the wrong direction through the pipes, usually from a loss of pressure on the supply-line side or by pressure increases on the customer side. Causes include water line breaks, repairs or shut-offs.

Also of concern are cross-connections, points of physical connection between drinking water and an actual or po- tential contamination hazard. Common cross-connections include:

  • Submerging garden hoses into buckets, pools, spas, tubs or sinks
  • Attaching garden hoses to chemical sprayers
  • Connecting private wells and irrigation systems to public water supply lines
  • Flooding events

An essential part of providing clean, safe drinking wa- ter to Fort Worth Water customers is ensuring one- way flow of disinfected, treated drinking water from the city’s water distribution system to the home. Bac-

kflow and cross-connections can carry potential conta- minants into the drinking water system, threatening public health and safety.

Preventing backflow requires installing the appropria- te backflow-prevention assembly device between the water supply and potential sources of pollution.This creates a closed flow system that prevents water from flowing backward through the pipes.

Residential installations of these devices include be- tween the water meter and the shut-off valve, and on hose bibs, irrigation systems, fire sprinkler systems con- necting to the city water supply, and more.

Customers can protect the city’s water distribution sys- tem from potential contamination by:

  • Installing appropriate equipment or ensuring appropriate air gap is in place unobstructed at all backflow cross-connections
  • Having systems regularly inspected by a licensed backflow professional
  • Never submerging hoses into sources filled through water lines; including swimming pools, sinks, toilets, bathtubs, dishwashers and was- hing machines

Visit: www.FortWorthTexas.gov/departments/water/backflow to learn more about backflow and cross connections.

11 Water Quality Report | 2020

202019 | Water Quality Report 8

2020 | Water Quality Report 12

Despite Pandemic, TakeBack Was Successful

Too often, unused and expired prescrip- tion drugs find their way into our wa- terways and water supply, often times after being washed down the sink or flushed down the toilet. This is dangerous and poten-

tially tragic.

That is why it was great to see hundreds of Fort Worth residents clean out their medi- cine cabinets and turn in prescription drugs during the October 2020 national TakeBack Meds event.

Nationwide, people turned in 839,543 pounds of unused and expired pharmaceu- ticals, according to the Drug Enforcement Administration.

In Fort Worth, 1,073 pounds of pharmaceu- ticals were brought to seven collection sites and in Texas, 65,791 pounds of drugs were turned in.

Storing unwanted and expired medications at home increases the risk for drug abuse or over- dose. And, improper drug disposal can conta- minate the soil if the medicines are thrown out in the trash.

While you might think our wastewater treat- ment plant takes care of those flushed medi- cations, it does not. Most treatment plants, including Fort Worth’s Village Creek Recla- mation Facility, are not equipped to remove pharmaceuticals from the wastewater.

Fort Worth began its efforts in November 2010, when the water utility, Code Complian- ce and police hosted the city’s first event.

In the past decade, Fort Worth has collec- ted 35,665 pounds of medicines. Fort Worth residents turned in 1,073 pounds of medici- ne during the most recent collection event (April 24, 2021).

Residents who don’t want to wait for the next national collection event can use any of the 12 year-round collection sites located around Fort Worth.

To find a location near you visit

www.meddropbox.org.

What can I bring to a medication drop box?

Since 2011, the DEA has hosted 20 national take back collection events, taking in more than 14.5 million pounds of medicine.

NOT ACCEPTED

ACCEPTED (at most locations)

13 Water Quality Report | 2020

  • Oxygen tanks and nebulizers
  • Needles
  • Thermometers
  • IV bags & any other equipment or syringes used to administer medications
  • All prescribed & over-the-counter medicines
  • Veterinary medications
  • Vitamins, minerals and samples

What Is This Report?

Fort Worth Water annually presents data to its residents on the quality of its drinking water with a Consumer

Confidence Report. The Texas Commission on Environmental Quality requires this report. The report shows how Fort Worth continues to deliver high-quality drinking water. The report also addresses where Fort Worth gets its raw water and information on water quality.

If you have questions regarding this report, please contact us at 817-392-4477 or wpe@ fortworthtexas.gov and we will get those answers for you.

Want to Know More About Water?

Fort Worth Water has employees who volunteer to talk at Career Day presentations as well as work events for the department, city and community. The H2O Heroes talk about a typical work day, education training requirements and what students need to focus on in studies to have a career with the water department.

If you are interested in a school or community group presentation, email: wpe@FortWorthTexas.gov

Contact Us

Water Customer Service

817-392-4477

7 a.m. ─ 7 p.m. Monday─Friday

24-Hour Emergencies select Option 1

Water Bill Payment Portal: www.FortWorthTexas.gov/paywaterbill

Water Administration

Fort Worth City Hall 200 Texas Street, 2nd floor Fort Worth, TX 76102

www.FortWorthTexas.gov/water

www.SaveFortWorthWater.org

The Water Department is part of the City of Fort Worth, Texas. Council meetings are open to the public and take place three times a month, on Tuesdays, in the council

chambers at City Hall. See the City Calendar for meeting dates and times. www.FortWorthTexas.gov/calendar/council

Other Resources

Environmental Protection Agency

www.epa.gov Texas Commission on Environmental Quality

www.tceq.texas.gov Texas Water Development Board www.twdb.texas.gov American Water Works Association www.awwa.org Drink Tap www.drinktap.org

Check Out Our Podcast!

Just search for "H2OMG" on your favorite podcast app or check us out at

www.theh2omg.podbean.com

15 Water Quality Report | 2020

Contaminants


City of Fort Worth

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Texas Commission on Environmental Quality, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 806380
  • Data available: 2012-2017
  • Data Source: Surface water
  • Total: 34

Contaminants That Exceed Guidelines

  • Arsenic
  • Bromate
  • Bromodichloromethane
  • Bromoform
  • Chloroform
  • Chromium (hexavalent)
  • Dibromochloromethane
  • Dichloroacetic acid
  • Nitrate
  • Radium%2C combined (-226 & -228)
  • Total trihalomethanes (TTHMs)

Other Detected Contaminants

  • Aluminum
  • Antimony
  • Atrazine
  • Barium
  • Benzene
  • Bromochloroacetic acid
  • Chlorate
  • Chromium (total)
  • Cyanide
  • Di(2-ethylhexyl) phthalate
  • Dibromoacetic acid
  • Fluoride
  • Haloacetic acids (HAA5)
  • Manganese
  • Methyl ethyl ketone
  • Molybdenum
  • Monobromoacetic acid
  • Monochloroacetic acid
  • Simazine
  • Strontium
  • Trichloroacetic acid
  • Uranium
  • Vanadium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

If you’re traveling to Fort Worth, Texas, you might have some concerns about drinking the tap water there. Tap water quality can vary highly from country to country, region to region, and even within state lines. This is the case with the tap water in Fort Worth, Texas, as issues of water sources and water pollution concern for local Texans and travelers alike. So what do you need to know about the tap water in Fort Worth? This article will examine the sources, water quality, and potential contaminants of Forth Worth’s tap water as well as offer some advice to travelers venturing to the fifth-largest city of the Lone Star State.

General Sources

The tap water of Fort Worth, Texas comes from surface water locales from a variety of lakes in the northeastern Texas region. These include Benbrook Lake, Lake Worth, Eagle Mountain Lake, Cedar Creek Lake, Lake Bridgeport, the Clear Fork Trinity River, and the Richland Chambers Reservoir.

These lakes are owned and administered by different entities. For example, the city of Fort Worth owns Lake Worth, while Benbrook Lake is under the jurisdiction of the U.S. Army Corps of Engineers. The other lakes are administered by the Tarrant Regional Water District, a water-control entity and a political subdivision of the State of Texas.

The City of Fort Worth’s Water Department mentions that contaminants that may be present in raw water before treatment can include herbicides, pesticides, inorganic contaminants, microbes, and organic chemical contaminants.

This, however, is not necessarily indicative of the quality of treated tap water. The Texas Commission on Environmental Quality (TCEQ) also mentions that Fort Worth’s raw water sources rank as high in terms of susceptibility — meaning the sources are more likely to come into contact with different contaminants — but this is also not indicative of health risks in Fort Worth’s treated tap water.

Water Quality

According to the website of the Fort Worth city government, Fort Worth’s water is subject to the national cleanliness standards as described in the 1974 Safe Drinking Water Act, with laws established by the U.S. Environmental Protection Agency (EPA).

Both the EPA and the TCEQ are responsible for enforcing these laws, and the latter agency creates and enforces laws specific to Texas. Fort Worth specifically releases annual reports through its Water Department — examining contaminant concentrations in water tested yearly for four consecutive quarters, and tested for cyanotoxins for four consecutive months.

Independent organizations have noted that the city of Fort Worth has complied with drinking water standards on the basis of health in recent years (from April 2016 to March 2019). The city issues guidelines for dealing with tap water turbidity (cloudiness), brown or dirty appearances, and high lead, copper, ozone, and chlorine levels.

However, as recently as 2019 there have been low-level detections of the deadly microbes Cryptosporidium and Giardia Lamblia in Fort Worth’s water sources. There has also been a rare, but fatal occurrence of ingestion of the amoeba Naegleria fowleri in September 2020, albeit elsewhere in the state.

Fort Worth, as mandated by state regulations, does issue a warning to those who are immunocompromised, as well as younger children, older adults, those undergoing chemotherapy, on steroids, or diagnosed with HIV/AIDS about the potential presence of Cryptosporidium in the city’s drinking water. It is advised that locals and visitors consult with their physicians, and/or call the EPA’s Safe Drinking Water Hotline at (800) 426-4791.

Possible Contaminants

According to a 2019 report released by the Forth Worth Water Department, tap water was tested from June 2018 to March 2019 for the following organic and inorganic contaminants:

Soil Runoff

Soil runoff is determined by water turbidity, or the cloudiness of tap water. Fort Worth’s Water Department found that their tap water was 0.5 Nephelometric Turbidity Units (NTUs) on a scale from 0 to 1 NTUs, meaning water filtration in this regard was 99.9% effective.

Coliforms

Fecal coliforms (like Giardia and Cryptosporidium) and E. Coli are examples of harmful microorganisms. At an incidence rate of 1%, this is within acceptable levels as determined by state and federal guidelines.

Radioactive Materials

The presence of radium, uranium, and beta/photon emitters — often the result of erosion — were found to be within acceptable levels.

Chemical Compounds

The Fort Worth Water Department tests for arsenic, atrazine, barium, cyanide, fluoride, nitrates, nitrites, bromates, haloacetic acids, and trihalomethanes.

These chemical compounds are the result of drilling, fertilizers, pesticides, herbicides, water disinfection, and plastic production. They are typically measured in parts per million (ppm) or parts per billion (ppb).

Though the levels of these compounds in Fort Worth’s system do not violate EPA standards, some sources have noted an increased presence of substances (like arsenic) to levels that warrant additional treatment.

Minerals

Minerals such as calcium, sodium, magnesium, chloride, bicarbonate, and sulfate — are considered a determining factor in water hardness. At 8 to 10 grains of hardness per gallon, Fort Worth’s water is considered “Hard” by the U.S. Geological Survey and Water Quality Association classifications.

Lead and Copper

There is an ongoing process to replace Fort Worth’s outmoded lead service pipes — on behalf of those that fall under city ownership and those of private owners. By the end of 2021, the city is determined to remove all city-side lead service lines — with 1,177 (out of a total 1,757 found) already replaced.

In the meantime, measurements of lead and copper are actively monitored by Fort Worth’s Water Department. As of 2019, they fall within acceptable levels.

Advisory For Travelers

Travelers wishing to visit Forth Worth may want to note the EPA’s guidelines on disinfecting tap water, as well as the EPA’s general site regarding ground and drinking water. The EPA’s Safe Drinking Water hotline is at (800) 426-4791.

They can also follow the Centers for Disease Control and Prevention (CDC) guidelines on drinking water.

Locally, travelers can refer to the Fort Worth Water Department website for more information, or call (817) 392 -4477 for water customer service and water emergency issues.

Layer 1
Layer 1
Layer 1
Layer 1