Table of Contents
Can You Drink Tap Water in Irving?
Yes, Irving's tap water is generally considered safe to drink as Irving has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page or the city's water provider website.
According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Irving's water utility, City of Irving, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. The last violation for Irving was resolved on Nov. 30, 2016. This assessment is based on the City of Irving water system, other water systems in the city may have different results.
While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.
The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.
Water Quality Report for Irving Tap Water
The most recent publicly available numbers for measured contaminant levels in Irving tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.
Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.
EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.
There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.
We recommend looking at the contaminants present in Irving's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.
Irving Tap Water Safe Drinking Water Act Violation History - Prior 10 Years
Below is a ten year history of violations for the water system named City of Irving for Irving in Texas. For more details please see the "What do these Violations Mean?" section below.
From Nov. 1, 2016 to Nov. 30, 2016, Irving had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring Violation, more specifically, the violation code was Monitoring, Routine (RTCR) which falls into the Microbials rule code group, and the Total Coliform Rules rule code family for the following contaminant code: Revised Total Coliform Rule.
For the compliance period beginning July 1, 2015, Irving had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Consumer Confidence Report Inadequate Reporting which falls into the Other rule code group, and the Consumer Confidence Rule rule code family for the following contaminant code: Consumer Confidence Rule.
Is there Lead in Irving Water?
Based on the EPA’s ECHO Database, 90% of the samples taken from the Irving water system, City of Irving, between sample start date and sample end date, were at or below, 0.001 mg/L of lead in Irving water. This is 6.7% of the 0.015 mg/L action level. This means 10% of the samples taken from Irving contained more lead.
While Irving water testing may have found 0.001 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.
No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.
Are there PFAS in Irving Tap Water?
Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - DALLAS TX NWIRP - near Irving with suspected leaks.
With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Irving has been evaluated for yet.
Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.
Irving SDWA Violation History Table - Prior 10 Years
| Compliance Period | Status | Health-Based? | Category Code | Code | Rule Code | Contaminant Code | Rule Group Code | Rule Family Code |
|---|---|---|---|---|---|---|---|---|
| 11/01/2016 - 11/30/2016 | Resolved | No | Monitoring Violation (MON) | Monitoring, Routine (RTCR) (3A) | Revised Total Coliform Rule (111) | Revised Total Coliform Rule (8000) | Microbials (100) | Total Coliform Rules (110) |
| 07/01/2015 - | Resolved | No | Other Violation (Other) | Consumer Confidence Report Inadequate Reporting (72) | Consumer Confidence Rule (420) | Consumer Confidence Rule (7000) | Other (400) | Consumer Confidence Rule (420) |
What do these Violations Mean?
Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.
Health Based Violations
- Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
- Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
- Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.
Non-Health Based Violations
- Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
- Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
- Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.
SDWA Table Key
| Field | Description |
|---|---|
| Compliance Period | Dates of the compliance period. |
| Status |
Current status of the violation.
|
| Health-Based? | Whether the violation is health based. |
| Category Code |
The category of violation that is reported.
|
| Code | A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table. |
| Contaminant Code | A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation. |
| Rule Code |
Code for a National Drinking Water rule.
|
| Rule Group Code |
Code that uniquely identifies a rule group.
|
| Rule Family Code |
Code for rule family.
|
For more clarification please visit the EPA's data dictionary.
Irving Water - Frequently Asked Questions
| By Mail: | 825 W IRVING BLVD IRVING, TX, 75060-2845 |
Existing customers can login to their City of Irving account to pay their Irving water bill by clicking here.
If you want to pay your City of Irving bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Irving water bill.
If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Irving water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.
Moving to a new house or apartment in Irving means you will often need to put the water in your name with City of Irving. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.
Leaving your house or apartment in Irving means you will likely need to take your name off of the water bill with City of Irving. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.
The estimated price of bottled water
$1.75 in USD (1.5-liter)
USER SUBMITTED RATINGS
- Drinking Water Pollution and Inaccessibility
- Water Pollution
- Drinking Water Quality and Accessibility
- Water Quality
The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Irving, measured on a scale from 0% (lowest) to 100% (highest).
Related FAQS
Irving Water Quality Report (Consumer Confidence Report)
The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Irving's Water. If you would like to see the original version of the report, please click here.
City of Irving
drinking water is
safe.
MARK OF
EXCELLENCE
An abundant, reliable and safe water supply is vital to public health, public safety and maintaining a vibrant economy. In a community whose population and water needs are continuously expanding, Irving Water Utilities plays a critical role, ensuring the availability of this necessary resource. Water Utilities provides some of the
2020 CITY OF IRVING
WATER
QUALITY
REPORT
The City of Irving presents its 2020 Water Quality Report that profiles and underscores the
EACH DOLLAR SPENT ON IRVING
WATER DOES 6 THINGS
even more remarkable, Irving water rates are among the lowest of any major city in the area.
In 1996, Congress amended the Safe Drinking Water Act, requiring community water systems to provide customers with an annual report on the quality of their drinking water. The City of Irving strongly supported the legislation and is eager to provide detailed information about the city’s drinking water. Irving’s water meets or exceeds all standards set by the Environmental Protection Agency (EPA). Water is processed by the City of Dallas and delivered to Irving ready to distribute to residents.
“Installing and maintaining the infrastructure to deliver water to each residence and business
THE COST
OF WATER
A GALLON OF
IRVING WATER
Cost Less than 1/2 of a Penny
12 3 4
5% Regulatory testing to
1 verify water safety for public health
% Water Supply: ensuring 3 8 availability with lakes
and pumping systems
% O&M/Repair: daily 5 30 maintenance and
repair of water delivery system
56
2 7% |
Meter reading, billing |
|
and customer service |
|
Treatment: cleaning and |
|
purifying water to ensure |
4 18% customer health/safety |
|
6 32% Infrastructure: building and renewing water delivery system (pipes, hydrants, etc.)
in Irving is a complex and important mission, especially considering that water is critical to public health and safety”, said Water Utilities Director Todd Reck. “Irving Water Utilities employees tackle this work 24 hours a day, 365 days a year and are very committed to meeting our customer’s needs. Our Water Quality Report underscores the value of Irving water and how we ensure a
Furthermore,
in January
2020, the Texas
$1.792BottleLiterof Soda
$3.65Small
$4.20Gallonof MilkLatte
$5.74Gallon of Orange Juice
$2.88Gallon of Sweet Tea
AVERAGE BILL FOR WATER IN THE SUMMER IS
$45.10
(just under 10,000 gallons)
Customers sometimes use three or four times that amount when temperatures soar, irrigation is increased and pools are topped off.
Commission on
Environmental
Quality (TCEQ)
reconfirmed the
City of Irving drinking water system as a Superior Public Water System.
Providing safe drinking water to the
community is a complex business. This report provides residents with information that is comprehensive and explained as
simply as possible. Residents can contact the Water Utilities Department at anytime to ask questions or voice concerns about drinking water at (972)
For inquiries about public participation and
policy decisions, call (972)
IRRIGATION ASSISTANCE PROGRAM
Responsible irrigation starts with understanding the irrigation system, landscape needs and Irving’s irrigation ordinance. Homeowners can do this on their own, but the City of Irving developed a new program in 2019 that provides support for irrigation
-
Performing irrigation system
check-ups on request. - Teaching how to program irrigation controllers and hose timers.
-
Providing information on complying with
twice-weekly watering. - Using demonstration models to show how simple repairs can be made.
- Conducting workshops to teach residents best irrigation practices.
- Granting variances to ensure additional irrigation for new plantings.
- Showing how to register for WaterMyYard.org to determine when to irrigate.
In addition to all the new services available to residents, the city’s irrigator is responsible for patrolling Irving to enforce the irrigation ordinance which limits watering to no more than
Irving’s ordinance also prohibits irrigation between 10 a.m. and 6 p.m. on any day from April 1 to Oct. 31. Avoiding the
For more information on scheduling a
Source: Texas Commission on Environmental Quality
SAFE DRINKING
WATER ACT
Under the Safe Drinking Water Act (SDWA), the EPA is responsible for setting national limits for hundreds of substances in drinking water and also specifies various treatments that water systems must use to remove these substances. Similarly, the Food and Drug Administration (FDA) regulations establish limits for contaminants in bottled water, which must provide the same protection for public health. Each water system continually monitors for these substances and reports directly to the EPA if they are detected in the drinking water. The EPA uses this data to ensure that consumers are receiving clean water and verifies that states are enforcing the laws that regulate drinking water.
This publication conforms to the federal regulation under SDWA requiring water utilities to provide detailed water quality information to each of its customers annually. For more information about this report, to request additional copies or for any questions or concerns relating to drinking water, contact Irving’s Environmental Compliance division
at (972)
SUBSTANCES EXPECTED IN DRINKING WATER
The sources of drinking water (both tap and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.
Contaminants that may be present in source water include:
- Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations and wildlife.
- Inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining or farming.
- Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff and residential uses.
- Organic chemical contaminants, including synthetic and volatile organic chemicals, which are byproducts of industrial processes and petroleum production, and also can come from gas stations, urban stormwater runoff and septic systems.
- Radioactive contaminants, which can be naturally occurring or be the result of oil and gas production, as well as mining activities.
To ensure that tap water is safe to drink, the EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water, which must provide the same protection for public health. Many constituents (such as calcium, sodium or iron), which are often found in drinking water, can cause taste, color and odor problems. The taste and odor constituents are called secondary constituents and are regulated by the State of Texas, not the EPA. These constituents are not causes for health concern. Therefore, secondaries are not required to be reported in this document, but may greatly affect the appearance and taste of the water.
When drinking water meets federal standards, there may not be any health benefits to purchasing bottled water. More information about contaminants and potential health effects can be obtained by calling the EPA’s
Safe Drinking Water Hotline at (800)
WHERE DOES IRVING GET ITS DRINKING WATER?
Most of Irving’s water travels from Lake Chapman to Lewisville Lake and is then treated by the City of Dallas. Irving owns water rights for water in Lake Chapman, which was previously known as Cooper Reservoir. Some of the City of Irving’s water is purchased directly from the City of Dallas to supplement the Lake Chapman water. The City of Dallas uses surface water from the following sources: Lake Grapevine, Lake Ray Hubbard, Lake Ray Roberts, Lake Tawakoni and Lewisville Lake. The TCEQ has completed a Source Water Susceptibility Report for all drinking water systems that own their sources. This report describes the susceptibility and types of contaminants that may come into contact with the drinking water source based on human activities and natural conditions. For more information on source water assessments and protection efforts, call (972)
NOTICE FOR
HIGH HEALTH RISK
GROUPS
Certain groups may be more vulnerable to contaminants in drinking water, such as cryptosporidium, than the general population. Infants; some elderly or immunocompromised persons, such as those undergoing chemotherapy for cancer; those who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders can be particularly at risk of contracting infections. Those who fall under these categories should seek advice about drinking water from a physician or healthcare provider.
Additional guidelines on appropriate means to reduce the risk of infection by cryptosporidium are available from the Safe Drinking Water Hotline at
(800)
IRVING WATER SUPPLY FLOW ... SOURCE TO FAUCET
WHAT IS IN THE WATER?
Irving Water Utilities reports that during the past year the water delivered to Irving homes and businesses complied with, or exceeded, all state and federal drinking water requirements. The table on the next page lists the substances that were detected in the city’s drinking water during 2020. Although all of the substances listed are under the Maximum Contaminant Level (MCL) set by the EPA and therefore not expected to cause any health risks, it is important that residents know exactly what was detected and how much of the substance was present in the water.
What are coliforms?
Total coliform bacteria are used as indicators of microbial contamination of drinking water because testing for them is easy. While these organisms do not cause disease, they are often found in association with other microbes that are capable of causing disease. Coliform bacteria are more hardy than many
How does the city determine if there is a problem with drinking water?
If the amount of a contaminant exceeds a predetermined safe level in drinking water (MCL, Action Level, etc.), residents will be notified via newspapers, radio, television, the city’s iALERT system and other means within
24 hours of receiving test results. With the notification, there will be instructions on the appropriate actions to take to prevent health risks.
Source: Texas Commission on Environmental Quality
Irving’s
is Thoroughly
Tested and Meets
All Drinking Water
Standards
DRINKING
WATER
TEST DATA
Regulated at the Dallas Treatment Plant
Inorganic Contaminants
Source: City of Dallas
Year |
|
Contaminant |
2020 |
|
Fluoride |
|
||
2020 |
|
Nitrate (as N) |
2020 |
|
Chromium |
2020 |
|
Barium |
2020 |
|
Cyanide |
2013 |
|
Nitrite (as N) |
|
|
|
Average Level
0.641
0.598
1.03
0.031
114.7
0.017
Minimum Level
0.626
0.457
<1
0.625
95.9
<0.004
Maximum
Level
0.667
0.686
1.80
0.034
149.0
0.032
MCL MCLG
4 4
10 10
100 100
2 2
200 200
1 1
Unit of
Measure
ppm ppm ppb ppm ppb ppm
Source of Contaminant
Erosion of natural deposits; water additive that promotes strong teeth
Runoff from fertilizer use; leaching from septic tanks, sewage, erosion of natural deposits
Discharge from steel and pulp mills; erosion of natural deposits
Discharge of drilling wastes from metal refineries; erosion of natural deposits
Discharge from steel/metal factories; discharge from plastic and fertilizer factories
Discharge from petroleum and metal refineries; erosion of natural deposits; discharge from mines
Unregulated Contaminants
Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in drinking water and whether future regulation is warranted. Any unregulated contaminants detected are reported in the following table. For additional information, call the Safe Drinking Water Hotline at (800)
Year
2019
2019
2019
Contaminant
Chloroform
Bromodichloromethane
Dibromochloromethane
Average Level |
Minimum Level |
Maximum Level |
16.18 |
|
44.20 |
1.74 |
||
5.56 |
2.78 |
10.60 |
2.91 |
2.40 |
3.50 |
MCLG |
Unit of Measure |
70 |
ppb |
0ppb
60 ppb
Source of Contaminant
Byproduct of drinking water disinfection Byproduct of drinking water disinfection Byproduct of drinking water disinfection
Organic Contaminants
Year |
|
Contaminant |
2020 |
|
Atrazine |
|
||
|
|
|
Average Level |
|
Minimum Level |
|
Maximum Level |
|
MCL |
0.13 |
|
<0.1 |
|
0.20 |
|
3 |
|
|
|
||||
|
|
|
|
|
|
|
MCLG Unit of Measure
3ppb
Source of Contaminant
Runoff from herbicide on row crops
Total Organic Carbon
Year
2020
Contaminant
Total Organic Carbon
Average Level |
Minimum Level |
Maximum Level |
2.81 |
|
3.59 |
2.18 |
||
|
|
|
-
(no MCL)
35% removal/SUVA <2
Unit of Measure
ppm
Source of Contaminant
Naturally present in environment; no health effects
Treatment technique requires
Turbidity
Year
Contaminant
Highest Single Measurement
Lowest Monthly % of Samples Meeting Limits Turbidity Limits |
Unit of Measure |
Source of Contaminant |
2020
Turbidity
0.23
100%
0.3 (TT)
NTU
Soil runoff
All samples met regulatory requirements.
Regulated in the Irving Distribution System
Inorganic Contaminants
Year |
|
Contaminant |
|
Minimum Level |
|
Maximum Level |
|
MCL |
|
MCLG |
|
Unit of Measure |
2019 |
|
Nitrate (as N) |
|
0.875 |
|
0.933 |
|
10 |
|
10 |
|
ppm |
|
|
|
|
|
|
|||||||
2015 |
|
Nitrite |
|
<0.004 |
|
0.092 |
|
1 |
|
1 |
|
ppm |
|
|
|
|
|
|
|
|
|
|
|
|
|
Source: City of Irving
Source of Contaminant
Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits
Discharge from petroleum and metal refineries; erosion of natural deposits; discharge from mines
Maximum Residual Disinfectant Level
Year |
|
Disinfectant |
|
Average Level |
|
Minimum Level |
|
Maximum Level |
|
MRDL |
|
MRDLG |
|
Unit of Measure |
|
Source of Disinfectant |
2020 |
|
Chloramine Residual |
|
2.99 |
|
0.91 |
|
3.98 |
|
4* |
|
4* |
|
ppm |
|
Disinfectant used to control microbes |
|
|
|
|
|
|
|
|
*As annual average.
Disinfection Byproducts
Year
2020
2020
Contaminant
Total Haloacetic Acids Total Trihalomethanes
Average LRAA |
|
Minimum Level |
|
Maximum Level |
15.2 |
|
9.8 |
|
24 |
|
|
|||
18 |
|
9.26 |
|
31 |
MCL
60
80
Unit of Measure
ppb ppb
Source of Contaminant
Byproduct of drinking water disinfection Byproduct of drinking water disinfection
Unregulated Contaminants Monitoring Rule 4
Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in drinking water and whether future regulation is warranted.
Year
2020
2020
2020
2020
Contaminant
HAA5*
HAA6Br**
HAA9***
Maganese
Average Level
20.04
8.50
26.93
5.39
Minimum Maximum
Level Level
13.43 26.209
6.376 11.656
19.027 33.799
0.745 11.2
Unit of
Measure
ug/L
ug/L
ug/L
ug/L
Source of Contaminant
Byproduct of drinking water disinfection Byproduct of drinking water disinfection Byproduct of drinking water disinfection
Naturally occurring, erosion of soil and mineral deposits
*Dibromoacetic acid, dichloroacetic acid, monobromoacetic acid, monochloracetic acid, trichloroacetic acid **Bromodichloroacetic acid, dibromoacetic acid, chlorodibromoaetic acid, monobromoacetic acid, trichloroacetic acid
***Bromodichloroacetic acid, chlorodibromoaetic acid, dibromoacetic acid, dichloroacetic acid, monobromoacetic acid, monochloracetic acid, tribromoacetic acid, trichloroacetic acid
Coliforms
Year
2020
Contaminant
E. coli
Total Number of Positive E. coli Samples
0
MCL
0
Unit of Measure
Absence/Presence
Source of Contaminant
Naturally present in environment
Year
2020
Contaminant
Total Coliforms
Highest Monthly % of Positive Samples
2.4%
MCL
*
Unit of Measure
Absence/Presence
Source of Contaminant
Naturally present in environment
*Coliforms are bacteria that are naturally present in the environment and are used as an indicator that other, potentially harmful, waterborne pathogens may be present or that a potential pathway exists through which contamination may enter the drinking water distribution system. Under the Revised Total Coliform Rule of 2016, there is no MCL for indication of Total Coliform Bacteria. However, once water system sample results are coliform positive in greater than five percent of monthly samples, the water system is required to conduct an assessment of the treatment and distribution systems to ensure there are no sanitary defects.
Regulated at the Customer’s Tap
Source: City of Irving
Lead and Copper If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. This water supply is responsible for providing
Year
2018
2018
Contaminant |
90th |
No. of Sites Exceeding |
Percentile |
Action Level |
|
Lead |
1 |
1 |
Copper |
0.218 |
0 |
MCLG
0
1.3
Action
Level
15
1.3
Unit of
Measure
ppb
ppm
Source of Contaminant
Corrosion of household plumbing systems; erosion of natural deposits
Corrosion of household plumbing systems; erosion of natural deposits; leaching from wood preservatives
Table Definitions
- Action Level (AL) – The concentration of a contaminant which, if exceeded, triggers treatment or other requirements that a water system must follow.
- Level 1 Assessment – A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible) why total coliform bacteria were found.
- Level 2 Assessment – A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine (if possible) why an Escherichia coli (E. coli) maximum contaminant level (MCL) violation has occurred and/or why total coliform bacteria were found on multiple occasions.
- Locational Running Annual Average (LRAA) – The average of sample ana- lytical results for samples taken at a particular monitoring location during the previous four calendar quarters.
- Maximum Contaminant Level (MCL) – The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as fea- sible, using the best available treatment technology.
- Maximum Contaminant Level Goal (MCLG) – The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.
- Maximum Residual Disinfectant Level (MRDL) – The highest level of disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.
- Maximum Residual Disinfectant Level Goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contamination.
- Millerems per year (mrem/year) – Measure of radiation absorbed by the body.
- Nephelometric Turbidity Units (NTU) – Measurement of turbidity in water.
- Picocuries per Liter (pCi/L) – A measure of radioactivity.
- Treatment Technique (TT) – A required process intended to reduce the level of a contaminant in drinking water.
- Turbidity – A measure of clarity of drinking water. The lower the turbity the better.
- mfl – million fibers per liter (a measure of asbestos)
- ppb – parts per billion
- ppm – parts per million
Source: Texas Commission on Environmental Quality
FIRE HYDRANT
FLUSHING
The Water Utilities Department collects water samples every day to evaluate water quality to ensure a minimal level of chlorine for disinfection and confirm that water is safe for public consumption across the entire city. Sampling also ensures Irving meets state and federal standards for safe drinking water. When water quality nears the minimum standards allowable, it is flushed from the distribution system, bringing in fresh,
VALUE OF TAP WATER
Drinking water systems are critical to public health, fire protection, economic development and quality of life. Service disruptions can endanger the public and result in significant economic loss. To provide safe and reliable drinking water to customers, city staff operates and maintains over $4 billion in assets including six pump stations, nine elevated tanks, 10
WATER COST BREAKDOWN
20% |
|
Actual Water Used |
|
||
|
|
|
|
||
|
|
|
Chemicals and power for treatment |
||
|
|
|
and delivery, other variable costs |
|
|
|
|
|
|
Fixed System Costs |
|
|
|
|
|
||
|
|
|
|
Debt repayment, pipes, pumps, |
|
80% |
|
|
storage and treatment facilities |
are |
|
|
|
items paid for no matter how |
|
||
|
|
much water is purchased. That |
|
||
|
|
means every year, 80 percent of |
|
||
|
|
water system expenditures will |
occur |
||
|
|
in order to maintain the system |
|
||
regardless of how much water is purchased.
*These approximate percentages are for water costs only and do not include costs for wastewater collection and treatment.
temperatures.
Flushing water from the distribution system is similar to restaurants and grocery stores disposing of food that is past the expiration date. It is easy to understand that health and safety are the reasons for doing that. However, when passing by a fire hydrant where water is being flushed, many think that the city is throwing out “good” water. Unfortunately, water cannot be evaluated based on appearance, but requires sampling and analysis to determine its quality and to ensure that water meets standards required by state and federal agencies. So, flushing is critical to public health and safety.
Flushing also is necessary during and after repairs and when new lines are installed, as well as when complaints are received regarding air or debris in lines, and color or other issues. As water distribution lines age, flushing is required more frequently. It is important to know that inappropriate hydrant operation can cause injury or damage a hydrant or water line, so only city workers should operate hydrants. While the Fire Department checks all hydrants for operational and water pressure purposes once each year, the Water Utilities Department staff monitors the entire distribution system on a daily basis. Hydrants are an important tool, not only for fire suppression, but to flush water that has “expired” in order to ensure that fresh,
For information about drinking water, call the EPA’s Safe Drinking Water Hotline at (800)
Este reporte incluye información
importante sobre el agua para tomar. Para assitencia en espanol, favor de llamar al telefóno (972)
Source: Texas Commission on Environmental Quality
- Failing Infrastructure – Pipes need to be replaced each year to avoid water loss, unhealthy sewer leaks, loss of service and fines due to not meeting regulatory standards. Line replacements are critical to maintain water quality and to prevent outages and property damage due to line breaks and sewer backups. Replacements are expensive, and costs increase over time.
-
Fixed Expenses – Regardless of the time of year or amount of rainfall, water utilities must have the infrastructure to deliver an ample,
high-quality supply of water for its customers. Water Utilities fixed expenses make up a majority of the budget and must be paid no matter how much water is sold. - Regulatory Obligations – The TCEQ requires water utilities to meet regulatory standards by completing water study projects and paying water quality fees. TCEQ fees increase over time. In addition, existing agreements with the TCEQ require the city to replace a designated amount of infrastructure each year. The city must pay for the regulatory costs of these studies, fees and line replacements.
To decrease the financial and operational impacts placed on customers, innovative approaches to water and wastewater system maintenance are being embraced by the city. Through increased coordination between the Capital Improvement Program and the Water Utilities departments, a closer look is being given to the existing condition of both the water and wastewater systems, which can result in their simultaneous replacement.
A list of completed,
WATER LOSS
While the city works diligently to upgrade and maintain the water distribution system, line breaks and leaks result in a loss of water over time. In the water loss audit submitted to the Texas Water Development Board for the time period of January through December 2020, the City of Irving water distribution system lost an estimated 35 gallons per connection per day (16 gallons per person per day). This is 10.10 percent of the water pumped during the calendar year and meets the industry standard of 10 percent loss for effective water systems. For any questions about the water loss audit, call (972)
MAXIMIZE IRRIGATION RESULTS AND SAVE MONEY USING WATERMYYARD.ORG
The city provides a great tool to determine the amount of irrigation needed to supplement rainfall. Two weather stations, one in the north and one in the south, have been installed to give Irving residents highly accurate information to use when setting irrigation controllers.
The best irrigation approach is to turn the sprinkler system controller off and monitor WaterMyYard.org instructions to determine when additional irrigation is needed. To register for weekly information regarding the amount of time to run sprinkler systems, simply go to the website and enter the property location. The recommendation for the address will be provided automatically. The information may be customized to the property irrigation system, if desired, by clicking on the “Personalize” tab.
Below the watering recommendation, there is a prompt to register for a weekly email that will provide irrigation run times based on the closest
weather station. Completing this section will ensure that the most
IRRIGATION |
The Water Conservation Plan allows watering up to |
||
GUIDELINES |
No irrigation on Monday, Thursday or Friday. |
|
|
Sunday |
Tuesday |
Wednesday |
Saturday |
|
|
|
|
Odd address |
Even address |
Odd address |
Even address |
|
|
|
|
Cut out and keep for reference.
Contaminants
City of Irving
EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Texas Commission on Environmental Quality, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.
Utility details
- Serves: 238829
- Data available: 2012-2017
- Data Source: Purchased surface water
- Total: 41
Contaminants That Exceed Guidelines
- Arsenic*
- Bromate*
- Bromodichloromethane
- Chloroform
- Chromium (hexavalent)
- Dibromochloromethane
- Dichloroacetic acid
- Nitrate
- Nitrate and nitrite
- Total trihalomethanes (TTHMs)
- Trichloroacetic acid
Other Detected Contaminants
- 1%2C2%2C4-Trimethylbenzene*
- 1%2C3%2C5-Trimethylbenzene*
- 1%2C4-Dioxane
- 4-Androstene-3%2C17-dione
- Acetone*
- Aluminum*
- Antimony*
- Atrazine*
- Barium*
- Bromochloroacetic acid
- Bromoform
- Chlorate
- Chromium (total)
- Cyanide*
- Di(2-ethylhexyl) phthalate*
- Dibromoacetic acid
- Fluoride*
- Haloacetic acids (HAA5)
- Manganese*
- Methyl ethyl ketone*
- Molybdenum
- Monobromoacetic acid
- Monochloroacetic acid
- Naphthalene*
- Nitrite
- Selenium*
- Simazine*
- Strontium
- Tetrahydrofuran*
- Vanadium
Reminder
Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.
Sources and Resources
Sources Cited
Additional Resources
Irving Tap Water
Irving Water Treatment Center is a division of the City of Irving located in Texas. It was founded in 1957 and offered quality water and energy treatment facilities. You will find many hotels, restaurants, and other establishments that give a great taste of local flavor in this city. The City of Irving is also known for its natural beauty and vast lands.
The tap water at this water treatment center is tested several times a day for impurities. It has a well-monitored and controlled production system. It serves Fort Worth, Arlington, and Irving’s communities and even the residents of Wilsonville. These cities have a good supply of drinking water as it comes from reservoirs all over the state. The water is free of chlorination and fluoride.
Irving’s city has a good economic standing as it has one of the biggest refineries in the world. The city is also known for being a city with a low crime rate and having a low unemployment rate. Irving is a thriving city that is known for providing quality living at affordable rates. Many hotels are located near the city’s airport, making it easy to get access to this source of drinking water.
Irving Drinking Water
Irving, Texas, is known for the quality of its drinking water. Many have come to realize that there is a lot of contamination in the drinking water of many towns and cities throughout Texas. People do not like to drink contaminated water, mainly if used to drinking city water that has been treated and is good to use. Some people do not know that some of the city water is actually even more contaminated than some of the groundwater. This is where a sound water filtration system comes into play.
Having a filtration system installed in your home can ensure that you and your family are getting only filtered water. It is also essential to keep a lookout for the water quality that your city provides. There have been cases where a town has had to pay significant fines for not having a good filtration system in place. Suppose you notice anything out of the ordinary with the water that your city provides. In that case, you should try to call the water department to find out what is going on.
In conclusion, it is essential to have a good water filtration system installed in your home. Your health is one of the most important things that you will have to take care of. There is no reason to take chances when it comes to the water you and your family are drinking. By installing a high-quality filtration system, you will be able to have clean and safe drinking water in your home.
Irving Safe Drinking Water
Is Irving Texas Safe Drinking Water? The short answer is, “it’s probably safe, but not really.” The long answer is somewhat more complicated, as some aspects of this natural water treatment facility are actually quite concerning. For example, did you know that sediments were found in over half of the supply pipe during the testing phase? That’s right, that’s alarming since it means there is a possibility of contaminants from neighboring towns and counties entering the storm drain system and contaminating the drinking supply.
In addition to that, a testing center located nearby actually discovered a highly toxic chemical in one of the storms drains. This is called sodium hypochlorite and has been shown to cause severe damage to the nerve cells in the body. Suppose levels of this chemical are present in your drinking supply. In that case, it can lead to long-term neurological damage, along with the other negative effects associated with long-term exposure. Are you starting to get the picture here? This is why we have industrial facilities such as Irving, TX, and other places along the Gulf Coast monitored all the time by companies such as Dominion Virginia Power or Dominion Gas.
Now, to be fair, the testing was not performed at all times, so it’s hard to say what exactly had been found. But, it does show that a significant amount of contamination is indeed present. This may come as a huge surprise to some people. Remember, the drinking water we are all used to drinking comes from an extensive reservoir system controlled by a city. The water goes into individual homes through a private well, which is usually drilled into the ground. And then, some reservoirs provide drinking water for rural and far-flung areas.
Irving Water Quality Report
In June of 2021, the Irving Independent School District board opted to place a quality report card on its schools. This report card assessed every Irving water system and returned with some pretty bad news for Irving residents. While this particular report card did not contain much detail, it gave the city some information to work from when looking for ways to improve the city’s water quality. Suppose you are an Irving resident and look for some good news on improving your city’s water quality. In that case, you should review this article.
The report card detailed many of the problems associated with how city officials manage the city’s water supply. For instance, it showed that the overwhelming amount of chemical pollution found in the water makes it unfit for almost anyone’s consumption. Additionally, the report card showed that Irving ranks third in the nation for the most dangerous toxins in its water supply. Suppose you are looking for some good news about your city’s water quality. In that case, you should probably give this report card some severe thought.
Unfortunately, the city of Irving can only fix the quality of its water supply so much. There are too many residents in the city who do not take the water they receive in stride and make the most of what nature has provided. However, the good news is that the city is working hard to make sure that it improves its water quality further still. To find out more about the improvements that the city is making towards better water quality, you should review the website of the city of Irving. You can also view previous news reports on this website.
City of Irving Water
The city of Irving is located in the Texas Panhandle just north of Dallas. During a powerful rainstorm in June of 2021, city officials called a water release at the City of Irving Water Plant. This devastating flooding caused over three thousand residents to be displaced while damaging or destroying businesses, schools, and homes throughout the city. This natural disaster was the worst disaster to hit the City of Irving in over fifty years.
The water that caused flooding in the City of Irving Water Plant originated in Lake Lanier, a man-made lake located on the City of Irving’s boundary line with Ellis Island. The rapid rise of the water volume in Lake Lanier caused an overflow of the city’s storm drains, which then backed up into the lower levels of the city’s underground pipes system. The flooding in the City of Irving was one of the most significant water losses in Texas history. While no significant injuries were reported due to the flooding, many residents were forced to leave their homes without electricity, telephone services, or water service due to the damage caused by the flooding. Because of this disaster’s overwhelming magnitude, the City of Irving Water Plant was closed down until further notice.
The city of Irving Water Damage Repair crews has been hard at repairing the City of Irving water damage. Many of the problems associated with this flooding were minor and were quickly corrected. In some cases, the damage was extensive and required extensive repairs. While the City of Irving Water Plant was closed for several days while the flooded water was repaired, normal operations are now returning to normal.
Irving Water Supply
The Irving Water Supply is a valuable asset to many Irving residents. This is the leading source for commercial and residential use in the city. The Irving Water Supply System includes three primary sources: the Central Drain, Highland Dredging, and Highland Blending. These three central plumbing systems are responsible for providing safe, clean, drinkable water throughout the city of Irving. It is also used by the Irving Water Company and all of the Irving Water Treatment Centers. These plumbing fixtures have been inspected and certified to comply with the American Water Works Association (AWWA) standards.
When it comes to the Central Drain, the system collects stormwater runoff from the roofs of commercial buildings, including apartment complexes, hotels, and motels, and channels it to a central sewer line. This process reduces flood risk in areas where there is a high water table. The Central Drain also provides a controlled exit for residents to safely evacuate if flood waters become too profound or overwhelming. City workers and city residents work together to ensure that this water supply is maintained correctly regularly.
Highlands Dredging is the third prominent plumbing fixture in the city of Irving. This section of the water supply pipe carries water from the Central Drain into its underground sewer system. This particular fixture aims to channel stormwater away from homes, businesses, and other areas of the city. This water is then treated before it is released into public or private sources. This fixture was installed to help eliminate man-made sewer backups in the community.
Irving Water Systems
The Irving Water System is a well-known and trusted source of municipally treated water. For more than a century, they have provided excellent service to their millions of customers in Irving and surrounding areas. They are one of the largest water treatment plants in the Texas area, and the technicians who provide their service are some of the best in the industry. They have invested a great deal of time and money into improving their plumbing, heating, and drainage equipment to ensure that when you or your family use their services, you get the cleanest and best water possible.
There are several reasons you should always consider a serviced system by the city of Irving. If you are looking for an alternative water source, one of the most reliable and safest ways to get it is through a water filtration system. By doing this, you can be sure to rid your household have any harmful bacteria or parasites that could harm you or your family. These types of waterborne diseases can cause sickness or even death in some situations. You want to be as safe as possible when using city water to make your drinking water.
When you are looking for a filtration system for your home, you should look for one that will work with the city of Irving’s chlorination standards. This means that it is designed to meet the highest standard of quality and that it works to eliminate any potentially harmful chemicals or substances that could end up in your water. Using a system that works with the city of Irving, you can rest assured that you will be getting the very safest water available on the market. This type of filtration benefits is numerous, including reducing the number of toxins in your household by almost 100 percent.
Irving Water Utility
Suppose you live in Irving, Texas, and are having problems with your electricity or gas. In that case, you might need to contact the Irving water utility for assistance. There are several reasons that you could have a problem with your utilities, such as a leak from your roof, a broken pipe, a clogged storm drain, or a faulty meter. When you call the utility, they will come out to assess the situation and give you an estimate of how much it will cost to fix the issue at hand. This is very helpful when you are without electricity or gas because it will let you know precisely what you need to do to get everything back on track.
The most important thing to remember if you ever find yourself in need of the Irving water utility, always has a phone line. You never know when you will have a water emergency. Having a phone line will help alert authorities and give you an idea of what steps need to be taken. When you call the water utility, you will usually have to provide them with your phone number. They will send out a repair person to assess the issue. They will also advise you on what steps to take next and tell you the estimated cost to fix the problem.
Even though it might seem inconvenient to call the water company in the middle of the night or after hours, this can be very dangerous. It can also be a waste of time because many of the complaints about water issues can wait until morning. Remember that you need to have your water and electrical service working and that you need to stay on top of it if you want to avoid future problems. Suppose you have any doubts about the quality of your service. In that case, you should call them and talk to a representative before taking any drastic action. They can give you a better idea of where the problem lies and how long it will take to fix it. With a bit of proactive maintenance, you can have a safe water supply and enjoy your daily life.
Irving Water Sources
There are many Irving Water Sources throughout the world that provide natural and commercial fish and marine life harvesting. The Irving Oil Refinery is located in downtown Irving, Texas, a short distance from Dallas, in the Irving Parish. The site of the refinery was purchased by the French in the 1800s. It is one of the world’s largest refineries today and produces over nine million barrels of oil daily. It uses several natural gases and petroleum products such as gasoline, diesel, natural gas liquids, and natural gas.
If you seek a place to hunt for wild Texas deer, moose, or bear, the Big Hole Lake System is the place to go. This lake system is only five miles long and covers nearly two hundred miles of scenic lake beds in three counties in Texas. The most abundant species of wildlife found here are white-tailed deer, including Texas whitetails and cottontails, as well as numerous migratory birds, including towhees, white-crowned sparrows, indigo buntings, and red-winged blackbirds. In fact, the record twenty-two species of flora and fauna were recently identified within this reservoir’s boundaries. Several hundred migratory bird species also call this an ideal location to visit.
Commercial and/or recreational fishing can be a great way to make your vacation money. The reservoir is also known for its enormous numbers of sturgeons, largemouth bass, and numerous other fish species. A large portion of these fish come from the Cedar and Grand Rivers region of Texas. There is no legal limit on the number of fish that may be taken or the amount of freshwater fish and/or marine life that may be harvested. For this reason, it is essential to be advised that when using any of the Irving Water Sources, it is best to contact a state fish hatchery or private sport fishing boat to ensure the safety of your catch.
Texas Commission on Environmental
The Texas Commission on Environmental Quality (TCEQ) is an agency of the Texas legislature’s state government. Its primary function is to protect the environment from adverse environmental effects. They also help promote and develop local, state, and federal programs that protect the environment, manage pollution, and protect Texas’s natural resources. Among the many services they offer are air and water quality testing and reporting, including testing for radon, sediment, pesticides, and herbicides and protecting natural resources by ensuring proper placement, management, and protection of those resources.
TCEQ works closely with many government agencies to ensure they are meeting their responsibilities to protect the state and its citizens. One such agency is the Texas Pollution Control Board (TPCCB). If you were to look up their website, you would find a list of past and present clients, as well as a list of services they offer and a short overview of their mission and objectives. In addition to their efforts to ensure Texans’ safety and health, the TCEQ also works to improve air quality throughout the state. As such, it publishes air quality reports, publishes the Texas Pollutant Discharge Elimination System Registry (TPDSR), and works to regulate emissions from companies within the state and on an international scale.
While the TCEQ does a great deal to protect the environment, it has also developed a plan to control pollution. Part of this plan is to reduce the amount of energy consumed through energy production, demand for oil and gas, and fossil fuel resource development. For example, they offer technical assistance to major manufacturers, like AT&T, to help them comply with the Energy Conservation Account Act. The purpose of this act is to require major industrial plants to generate an average of 60% of their energy needs from alternative or renewable sources by 2021. This is a laudable goal, but the act’s implementation is a bit hit and miss, so it’s essential for Texas businesses to work with the Texas Commission on Environmental Quality to ensure that they are complying with the rules.