Layer 1

Is Fort Smith Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, July 28, 2022
+

Table of Contents

Can You Drink Tap Water in Fort Smith?

Yes, Fort Smith's tap water is generally considered safe to drink as Fort Smith has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page, the city's water provider website, or Fort Smith's local Twitter account.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Fort Smith's water utility, Fort Smith Water Utilities, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. The last violation for Fort Smith was resolved on Aug. 31, 2017. This assessment is based on the Fort Smith Water Utilities water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Fort Smith Tap Water

The most recent publicly available numbers for measured contaminant levels in Fort Smith tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Fort Smith's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Fort Smith Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named Fort Smith Water Utilities for Fort Smith in Arkansas. For more details please see the "What do these Violations Mean?" section below.

From Aug. 1, 2017 to Aug. 31, 2017, Fort Smith had 1 health-based Safe Drinking Water Act violation with the violation category being Treatment Technique Violation, more specifically, the violation code was Treatment Technique (SWTR and GWR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Surface Water Treatment Rule.

Is there Lead in Fort Smith Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Fort Smith water system, Fort Smith Water Utilities, between sample start date and sample end date, were at or below, 0.003 mg/L of lead in Fort Smith water. This is 20.0% of the 0.015 mg/L action level. This means 10% of the samples taken from Fort Smith contained more lead.

While Fort Smith water testing may have found 0.003 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Fort Smith Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - Fort Smith Municipal Airport - near Fort Smith with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Fort Smith has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Fort Smith SDWA Violation History Table - Prior 10 Years

Compliance Period Status Health-Based? Category Code Code Rule Code Contaminant Code Rule Group Code Rule Family Code
08/01/2017 - 08/31/2017 Resolved Yes Treatment Technique Violation (TT) Treatment Technique (SWTR and GWR) (41) Surface Water Treatment Rule (121) Surface Water Treatment Rule (0200) Microbials (100) Surface Water Treatment Rules (120)

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Fort Smith Water - Frequently Asked Questions

WHERE DOES OUR DRINKING WATER COME FROM?
Fort Smith has two independent water sources. Our primary water source is the Frog Bayou watershed, a 74 square mile forested valley located in the Boston Mountains, 2 miles north of Mountainburg, AR. The Frog Bayou supply comes from rain (43-56” of rain per year), and stream runoff flowing down the slopes of the watershed. The water is stored in Lake Fort Smith (approximately 1,400 surface acres) and is treated at Fort Smith’s Lake Fort Smith Water Treatment Plant. Fort Smith’s other water supply is the Lee Creek watershed, a 439 square mile area located in both the States of Arkansas and Oklahoma. The Lee Creek supply also comes from rain (43-56” of rain per year), and stream runoff flowing down the slopes of the watershed. The water from this watershed is stored in the Lee Creek Reservoir (approximately 634 surface acres) and is treated at Fort Smith’s Lee Creek Water Treatment Plant. The Arkansas Department of Health completed a Source Water Vulnerability Assessment for Fort Smith Water Utilities. The assessment summarizes the potential for contamination of our source(s) of drinking water and can be used as a basis for developing a source water protection plan. Based on the various criteria of the assessment, our water sources have been determined to have a low to medium susceptibility to contamination. You may request a summary of the Source Water Vulnerability Assessment from our office. Fresh clean drinking water is yours to use whenever you need it. But not to waste. It’s too valuable. Remember that a little effort and a little common sense will make a big difference.
HOW SAFE IS THE SOURCE OF OUR DRINKING WATER?
The Arkansas Department of Health completed a Source Water Vulnerability Assessment for Fort Smith Water Utilities. The assessment summarizes the potential for contamination of our source(s) of drinking water and can be used as a basis for developing a source water protection plan. Based on the various criteria of the assessment, our water sources have been determined to have a low to medium susceptibility to contamination. You may request a summary of the Source Water Vulnerability Assessment from our office. Fresh clean drinking water is yours to use whenever you need it. But not to waste. It’s too valuable. Remember that a little effort and a little common sense will make a big difference.
DO I NEED TO TAKE SPECIAL PRECAUTIONS?
Important Health Information for Immuno-compromised persons. Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from small amounts of contamination. These people should seek advice about drinking water from their health care providers. In addition, EPA/CDC guidelines on appropriate means to lessen the risk of infection by microbiological contaminants are also available from the Safe Drinking Water Hotline (800-426-4791). Cryptosporidium is a microbial pathogen found in surface water throughout the U.S. It lives and reproduces only with the host. In the environment, Cryptosporidium exists as a thick walled oocyst, containing four organisms. Monitoring by Ft. Smith Water Utilities in May 2016 indicated the presence of one of these organisms in the Lake Fort Smith water source. It is important to know that although filtration removes Cryptosporidium, the most commonly used filtration methods cannot guarantee 100 percent removal. Ingestion of Cryptosporidium may cause cryptosporidiosis, an abdominal infection. Symptoms of infection include nausea, diarrhea, and abdominal cramps. Most healthy individuals can overcome the disease within a few weeks. However, immuno-compromised people are at greater risk of developing life threatening illness. We encourage immuno-compromised individuals to consult their doctor regarding appropriate precautions to take to avoid infection. Cryptosporidium must be ingested to cause disease, and it may be spread through means other than drinking water. Primary standards protect public health. Primary standards include maximum contaminant levels, maximum contaminant level goals, action levels and treatment techniques. These standards are established by the EPA to protect human health. Secondary standards relate to aesthetics. These guidelines are designed to assure good aesthetic quality of water. Secondary standards apply to contaminants that affect the taste, odor or color of water, stain sinks or bathtubs, or interfere with treatment processes. Secondary contaminants are not considered to present a risk to human health at the SMCL. As you can see in the Water Quality tables, our system had no violations during 2020. We’re proud that your drinking water meets or exceeds all Federal and State requirements. We at the Fort Smith Water Utility work around the clock to provide top quality water to every tap.
IS OUR WATER SYSTEM MEETING THE RULES THAT GOVERN OUR OPERATIONS?
As you can see in the Water Quality tables, our system had no violations during 2020. We’re proud that your drinking water meets or exceeds all Federal and State requirements. We at the Fort Smith Water Utility work around the clock to provide top quality water to every tap.
HOW CAN I GET INVOLVED?
We want our valued customers to be informed about their water utility. If you have any questions about this report or concerning your water utility, please contact Environmental Quality Program Manager, Don Clover at 479-784-2337, or visit our web site at www.fortsmithwater.org. We want our valued customers to be informed about their water utility. If you want to learn more, please attend any of our regularly scheduled meetings. They are held on the first and third Tuesday of each month. Meeting times and locations vary. Please call the City Clerk’s Office at 479-784-2208 for specific times and locations. Agendas and meeting minutes may be viewed on the city’s web site at www.fortsmithar.gov, Click on “Government” then “Board of Directors” then “Board of Directors Minutes, Agendas & Meeting Videos” . If you have additional questions regarding the quality of drinking water, you can contact someone on the following list.
HOW DO I CONTACT FORT SMITH CUSTOMER SERVICE?
To contact customer service for the Fort Smith water provider, Fort Smith Water Utilities, please use the information below.
By Phone: 479-369-2246
By Email: dclover@fortsmithar.gov
By Mail: 3900 KELLEY HIGHWAY
FORT SMITH, AR, 72904
HOW TO PAY BILL FOR FORT SMITH WATER UTILITIES
Already have an account?

Existing customers can login to their Fort Smith Water Utilities account to pay their Fort Smith water bill by clicking here.

Want to create a new account?

If you want to pay your Fort Smith Water Utilities bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Fort Smith water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Fort Smith water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP FORT SMITH WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Fort Smith means you will often need to put the water in your name with Fort Smith Water Utilities. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Fort Smith means you will likely need to take your name off of the water bill with Fort Smith Water Utilities. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

The estimated price of bottled water

$2.75 in USD (1.5-liter)

USER SUBMITTED RATINGS

Fort Smith tap water
  • Drinking Water Pollution and Inaccessibility 50% Moderate
  • Water Pollution 25% Low
  • Drinking Water Quality and Accessibility 50% Moderate
  • Water Quality 75% High

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Fort Smith, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Fort Smith Water Quality Report (Consumer Confidence Report)

The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Fort Smith's Water. If you would like to see the original version of the report, please click here.

Safe Water

  • from the source all the way to the tap!

Fort Smith Utility

2020

Water Quality Report

1

Fort Smith Utility Department

3900 Kelley Highway - Fort Smith, AR 72904

Phone: 479-784-2231

Utility Director - Lance McAvoy

Treatment Program Manager - Steve Floyd

Environmental Quality Program Manager - Don Clover

We’re pleased to present to you this year’s Annual Drinking Water Quality Report. This report is designed to inform you about the quality of your water, what it means and services we deliver to you every day. Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to understand, and be involved in the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water.

This report contains important information about your drinking water. Translate it, or speak with someone who understands it.

Spanish: Este documento contiene información importante acerca del agua potable que usted consume. Si no puede leer este

informe, por favor pida a alguien que le ayude a enternderlo.

Laotian:

Vietnamese:

The United States Congress has directed the Environmental Protection Agency (EPA) to require public water systems to report annually on the quality of drinking water they provide. The City of Fort Smith Utilities supports this regulation and is providing this report to all customers in our service area. This report is about your drinking water sources and quality; regulations that protect your health; programs that protect the high quality of our supply sources; and the treatment processes that assure our drinking water meets or surpasses all federal and state standards. Congress passed the Safe Drinking Water Act in 1974, delegating to the U.S. Environmental Protection Agency (EPA) the authority to regulate public water systems to protect public health. In order to assure that tap water is safe to drink, EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems. The Food and Drug Administration (FDA) regulations established limits for contaminants in bottled water which must provide the same protection for public health.

Where Does Our Drinking Water Come From?

Fort Smith has two independent water sources. Our primary water source is the Frog Bayou watershed, a 74 square mile forested valley located in the Boston Mountains, 2 miles north of Mountainburg, AR. The Frog Bayou supply comes from rain (43-56” of rain per year), and stream runoff flowing down the slopes of the watershed. The water is stored in Lake Fort Smith (approximately 1,400 surface acres) and is treated at Fort Smith’s Lake Fort Smith Water Treatment Plant. Fort Smith’s other water supply is the Lee Creek watershed, a 439 square mile area located in both the States of Arkansas and Oklahoma. The Lee Creek supply also comes from rain (43-56” of rain per year), and stream runoff flowing down the slopes of the watershed. The water from this watershed is stored in the Lee Creek Reservoir (approximately 634 surface acres) and is treated at Fort Smith’s Lee Creek Water Treatment Plant.

How Safe Is The Source Of Our Drinking Water?

The Arkansas Department of Health completed a Source Water Vulnerability Assessment for Fort Smith Water Utilities. The assessment summarizes the potential for contamination of our source(s) of drinking water and can be used as a basis for developing a source water protection plan. Based on the various criteria of the assessment, our water sources have been determined to have a low to medium susceptibility to contamination. You may request a summary of the Source Water Vulnerability Assessment from our office.

Fresh clean drinking water is yours to use whenever you need it. But not to waste. It’s too valuable. Remember that a little effort and a little common sense will make a big difference.

Use Water . . . And Use it Wisely

2

Utility Department Increases Customer Service

In 2019, a temporary call center was established to aid customers with their account and billing inquiries. Increased communication options were critical due to a new bill layout and challenges within a new billing system. The call center was also instrumental in helping citizens with the historic flood of 2019 and provided a point of contact during the 2020 COVID-19 pandemic while social distancing was necessary. With the rise in COVID cases, the Utility Department also began looking at additional methods to serve customers. A utility payment drive-thru was opened to further enable social distancing. The drive-thru was staffed with existing employees, which reduced the number of customers that Citizen Services could assist at the Garrison Avenue location.

In March of 2021, the City of Fort Smith Board of Directors voted to permanently add seven positions to provide sustained customer service for the Utility and Solid Waste Departments. The expansion of Citizen Services included a supervisor and six additional customer service representatives. A comprehensive assessment of job duties followed to determine staff efficiencies. Specific tasks were segregated for audit purposes. The current realignment of staff now allows for cross-training in all three areas of customer service: cashiering, in-person, and telecommunications. Fully trained staff can move from one location to the next based on overall traffic at each site. These improvements allow the Utility Department to better serve the citizens of Fort Smith.

Why are Contaminants in My Water?

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and radioactive material, and in some cases, can pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

  • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
  • Inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
  • Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.
  • Organic chemical contaminants, including synthetic and volatile organics, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff and septic systems.
  • Radioactive materials, which can be naturally occurring or be the result of oil and gas production and mining activities.

All drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that the water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency's Safe Drinking Water Hotline at 1-800-426-4791.

3

Terms and abbreviations used in this report

We routinely monitor for constituents in your drinking water according to Federal and State laws. The test results table shows the results of our monitoring for the period of January 1, 2020 to December 31, 2020 (unless otherwise stated). In the table you might find terms and abbreviations you are not familiar with. To help you better understand these terms we've provided the following definitions:

Action level (AL)-The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

Finished water: Water leaving the treatment plant and entering the distribution system.

Maximum Contaminant Level (MCL) - the highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

Maximum Contaminant Level Goal (MCLG) - unenforceable public health goal; the level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

Maximum Residual Disinfectant Level (MRDL) - the highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum Residual Disinfectant Level Goal (MRDLG) - the level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

Minimum detection limits: Many contaminants cannot be detected by current testing procedures. That can mean either there is no contaminant present, or that it is present at levels too low for modern laboratory equipment to detect.

Nephelometric Turbidity Unit (NTU) - a unit of measurement for the clarity of water. Turbidity in excess of 5 NTU is just noticeable to the average person.

Parts Per Billion (ppb)- a unit of measurement for the detection levels of contaminants in drinking water. One part per billion corresponds to one minute in 2,000 years , or a single penny in $10,000,000.

Parts Per Million (ppm)- a unit of measurement for the detection levels of contaminants in drinking water. One part per million corresponds to one minute in two (2) years , or a single penny in $10,000.

Secondary Maximum Contaminant Level (SMCL) - These are non-mandatory water quality standards established as aesthetic guidelines.

Treatment technique (TT)- A treatment technique is a required process intended to reduce the level of a contaminant in drinking water.

Unregulated contaminants: The EPA has not established a maximum contaminant level for every contaminant that might be found in drinking water. If no value is entered for the maximum contaminant level

goal, the contaminant is not currently regulated or is not considered to pose a health risk.

Key to Water Quality Tables

AL

Action Level

TT

Treatment Technique

MCL

Maximum Contaminant Level

MCLG

Maximum Contaminant Level Goal

NTU

Nephelometric Turbidity Unit

MRDL

Maximum Residual Disinfectant Level

MRDLG

Maximum Residual Disinfection Level Goal

WTP

Water Treatment Plant

NA

Not Applicable

4

Water Quality Data Tables

Turbidity

 

 

 

 

MCLG

 

 

Contaminant

Violation

Level Detected

Unit

(Public

MCL

Major Sources in

(Y/N)

Health

(Allowable Level)

Drinking Water

 

 

 

 

 

 

 

Goal)

 

 

 

 

 

 

 

Any measurement in

 

 

 

Highest yearly sample result:

 

 

excess of 1 NTU

 

Turbidity*

 

0.30

 

 

constitutes a violation

 

(Both WTPs)

N

Lowest monthly % of samples

NTU

NA

A value less than 95% of

Soil runoff

 

 

meeting the turbidity limit:

 

 

samples meeting the

 

 

 

100%

 

 

limit of 0.3 NTU

 

 

 

 

 

 

constitutes a violation

 

Note: * Turbidity is a measurement of the cloudiness of the water. We monitor it because it is a good indicator of the effectiveness of our filtration system.

Radioactive Contaminants

 

Violation

 

 

MCLG

MCL

 

Contaminant

Level Detected

Unit

(Public

Major Sources in Drinking Water

(Y/N)

(Allowable Level)

 

 

 

Health Goal)

 

 

 

 

 

 

 

Tritium

N

Average: 274.3

pCi/L

NA

NA

Corrosion of household plumbing

(Both WTPs)

Range: 0—575.8

systems; erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

Inorganic Contaminants

Contaminant

Violation

Level Detected

Unit

MCLG

MCL

Major Sources in

(Y/N)

(Public Health Goal)

(Allowable Level)

Drinking Water

 

 

 

Fluoride

 

 

 

 

 

Erosion of natural deposits; water

 

Average: 0.59

 

 

 

additive which promotes strong teeth;

(Lake Fort Smith

N

ppm

4

4

Range: 0.0 - 0.78

discharge from fertilizer and alumi-

WTP)

 

 

 

 

 

 

 

 

 

num factories

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Erosion of natural deposits; water

Fluoride

N

Average: 0.68

ppm

4

4

additive which promotes strong teeth;

(Lee Creek WTP)

Range: 0.0 - 0.87

discharge from fertilizer and alumi-

 

 

 

 

 

 

 

 

 

 

num factories

 

 

 

 

 

 

 

Nitrate [as Nitrogen]

 

Average: 0.32

 

 

 

Runoff from fertilizer use; leaching

(Mountainburg

N

ppm

10

10

from septic tanks, sewage; erosion of

Range: 0.30 - 0.34

WTP)

 

 

 

 

natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

Lead and Copper Tap Monitoring

Contaminant/(Site)

Number of

Number of sites

90% percentile

Unit

Action

Major Sources in Drinking Water

Sites Sampled

over Action Level

result

Level

 

 

 

 

 

 

 

 

 

 

Lead (Pb)

30

0

<0.001

ppm

0.015

Corrosion of household plumbing

(Distribution System)

systems; erosion of natural deposits

 

 

 

 

 

Copper (Cu)

30

0

<0.02

ppm

1.3

Corrosion of household plumbing

(Distribution System)

systems; erosion of natural deposits

 

 

 

 

 

Fort Smith is on a reduced monitoring schedule for sampling for lead and copper at the customers’ taps. The results above are from our last monitoring period in 2019. Our next scheduled monitoring period is the year 2022.

Total Organic Carbon

The percentage of Total Organic Carbon (TOC) removal was routinely monitored in 2020, at both the Lake Fort Smith and Lee Creek WTPs, and all TOC removal requirements set by USEPA were met for both of our sources. TOC has no health effects. However, Total Organic Car- bon provides a medium for the formation of disinfection by-products. These by-products include trihalomethanes (THMs) and haloacetic acids (HAAs).

5

Water Quality Data Tables

Regulated Disinfectants

Disinfectant

Violation

 

 

Level Detected

 

 

Unit

 

MCLG

 

MCL

 

Major Sources in Drinking Water

 

Y/N

 

 

 

 

 

(Public Health Goal)

 

(Allowable Level)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chlorine

N

 

 

Average: 1.20

 

 

ppm

 

4

 

4

 

Water additive used to control microbes.

 

 

Range: 0.41 – 1.59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

By-Products of Drinking Water Disinfection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contaminant

 

 

 

Violation

 

 

 

 

 

Level Detected

 

 

Unit

 

MCLG

MCL

 

 

 

 

Y/N

 

 

 

 

 

 

 

 

(Public Health Goal)

(Allowable Level)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HAA5 [Haloacetic Acids]

 

N

 

Highest running 12 month average: 20

 

ppb

 

0

60

 

 

 

 

 

 

Range: 11.3 – 29.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TTHM [Total Trihalomethanes]

 

N

 

Highest running 12 month average: 40

 

ppb

 

NA

80

 

 

 

 

 

 

Range: 16.1 - 75.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unregulated Contaminants

Contaminant

Level Detected

Unit

MCLG

Major Sources in Drinking Water

(Public Health Goal)

 

 

 

 

Chloroform

8.18

ppb

70

 

(Mountainburg WTP)

 

 

 

 

 

 

 

 

 

 

Chloroform

12.8

ppb

70

 

(Lee Creek WTP)

 

 

 

 

 

 

 

 

 

 

Bromodichloromethane

2.47

ppb

0

By-products of drinking water disinfection

(Mountainburg WTP)

 

 

 

 

 

 

 

 

 

Bromodichloromethane

5.49

ppb

0

 

(Lee Creek WTP)

 

 

 

 

 

 

 

 

 

 

Dibromochloromethane

2.63

ppb

60

 

(Lee Creek WTP)

 

 

 

 

 

 

 

 

 

 

Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in drinking water and whether future regulation is warranted. MCLs (Maximum Contaminant Levels) and MCLGs (Maximum Contaminant Level Goals) have not been established for all unregulated contaminants.

Secondary Standards - Standards Recommended by U.S. EPA and ADH

Inorganic

Unit

Secondary MCL

Level Detected Finished Water

Level Detected Finished Water

Chemicals

Mountainburg WTP

Lee Creek WTP

 

 

Aluminum

ppm

0.05 - 0.20

< 0.05

0.08

 

 

 

 

 

Chloride

ppm

250

4.8

7.9

Iron

ppm

0.30

< 0.05

< 0.05

 

 

 

 

 

Manganese

ppm

0.05

< 0.001

< 0.001

 

 

 

 

 

Sulfate

ppm

250

3.3

4.0

 

 

 

 

 

Zinc

ppm

NA

< 0.05

< 0.05

 

 

 

 

 

Additional Water Quality Parameters Monitored by ADH/City of Fort Smith

 

Analytes

Unit

Levels Detected

Analytes

Unit

Levels Detected

 

 

Finished Water

Finished Water

 

 

 

 

 

 

 

 

Alkalinity (Total)

ppm as CaCO3

26-40

Magnesium

ppm

1.34-1.88

 

 

 

 

 

 

 

 

 

 

Calcium

ppm as CaCO3

4.66-15.8

Potassium

ppm

1.12-1.55

 

 

 

 

 

 

 

 

 

 

Carbonate Hardness

ppm as CaCO3

17-40

Sodium

ppm

2.78-8.26

 

 

 

 

 

 

 

 

 

 

Hardness (Total)

ppm as CaCO3

17-47

Sediment

ppm

< 0.50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Lead and Drinking Water

Infants and young children are typically more vulnerable to lead in drinking water than the general population. It is possible that lead levels at your home may be higher than at other homes in the community as a result of materials used in your home’s plumbing. If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. Lead in drinking water is rarely the sole cause of lead poisoning, but it can add to a person’s total lead exposure. All potential sources of lead in the household should be identified and removed, replaced or reduced.

The City of Fort Smith is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods,

and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline (800-426-4791) or at http://www.epa.gov/safewater/lead.

Do I Need to Take Special Precautions?

Important Health Information for Immuno-compromised persons. Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from small amounts of contamination.

These people should seek advice about drinking water from their health care providers. In addition, EPA/CDC guidelines on appropriate means to lessen the risk of infection by microbiological contaminants are also available from the Safe Drinking Water Hotline (800-426-4791).

Cryptosporidium

Cryptosporidium is a microbial pathogen found in surface water throughout the U.S. It lives and reproduces only with the host. In the environment, Cryptosporidium exists as a thick walled oocyst, containing four organisms. Monitoring by Ft. Smith Water Utilities in May 2016 indicated the presence of one of these organisms in the Lake Fort Smith water source. It is important to know that although filtration removes Cryptosporidium, the most commonly used filtration methods cannot guarantee 100 percent removal. Ingestion of Cryptosporidium may cause cryptosporidiosis, an abdominal infection. Symptoms of infection include nausea, diarrhea, and abdominal cramps. Most healthy individuals can overcome the disease within a few weeks. However, immuno-compromised people are at greater risk of developing life threatening illness. We encourage immuno-compromised individuals to consult their doctor regarding appropriate precautions to take to avoid infection. Cryptosporidium must be ingested to cause disease, and it may be spread through means other than drinking water.

Drinking Water Standards

Primary standards protect public health. Primary standards include maximum contaminant levels, maximum contaminant level goals, action levels and treatment techniques. These standards are established by the EPA to protect human health.

Secondary standards relate to aesthetics. These guidelines are designed to assure good aesthetic quality of water. Secondary standards apply to contaminants that affect the taste, odor or color of water, stain sinks or bathtubs, or interfere with treatment processes. Secondary contaminants are not considered to present a risk to human health at the SMCL.

Is Our Water System Meeting the Rules that Govern Our Operations?

As you can see in the Water Quality tables, our system had no violations during 2020. We’re proud that your drinking water meets or exceeds all Federal and State requirements. We at the Fort Smith Water Utility work around the clock to provide top quality water to every tap.

7

2020 Water Quality Report

PRSRT-STD

Fort Smith Utility Department

U.S. POSTAGE PAID

3900 Kelley Hwy.

FORT SMITH, AR

Fort Smith, AR 72904

PERMIT NO.2

Water, Use It Wisely!

How Can I Get Involved?

We want our valued customers to be informed about their water utility.

If you have any questions about this report or concerning your water utility, please contact Environmental Quality Program Manager, Don Clover at 479-784-2337, or visit our web site at www.fortsmithwater.org.

We want our valued customers to be informed about their water utility. If you want to learn more, please attend any of our regularly scheduled meetings. They are held on the first and third Tuesday of each month. Meeting times and locations vary. Please call the City Clerk’s Office at 479-784-2208 for specific times and locations. Agendas and meeting minutes may be viewed on the city’s web site at www.fortsmithar.gov, Click on “Government” then “Board of Directors” then “Board of Directors Minutes, Agendas & Meeting Videos” .

If you have additional questions regarding the quality of drinking water, you can contact someone on the following list.

Agency

Telephone Number

Environmental Protection Agency (EPA) Safe Drinking Water Hotline

(800) 426-4791

Arkansas Department of Health Division of Engineering

(501) 661-2623

8

Contaminants


Fort Smith Water Utilities

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Arkansas Department of Health, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 86209
  • Data available: 2012-2017
  • Data Source: Surface water
  • Total: 15

Contaminants That Exceed Guidelines

  • Bromodichloromethane
  • Chloroform
  • Chromium (hexavalent)
  • Dibromochloromethane
  • Dichloroacetic acid
  • Total trihalomethanes (TTHMs)
  • Trichloroacetic acid

Other Detected Contaminants

  • Dibromoacetic acid
  • Fluoride
  • Haloacetic acids (HAA5)
  • Manganese
  • Monochloroacetic acid
  • Nitrate and nitrite
  • Strontium
  • Vanadium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

Layer 1
Layer 1
Layer 1
Layer 1